Results 1 to 9 of 9
  1. #1
    Junior Member
    Join Date
    Jun 2016
    Location
    london
    Posts
    1
    Rep Power
    0

    IR ADV 5235 OF75 JAM

    IR ADV 5235
    No internal finisher

    I have a canon 5235 colour copier which when on a run of 10 or more seems to jam consistently. the jam code is OF75. When the code is selected it shows no sensor location or paper source. When clearing paper jam, there is always paper coming out of delivery and one at registration. I have replaced fuser unit and paper feed driver pcb, and upgraded system software to no avail.
    Its a very unusual code which isn't in the manual so i'm stumped. Any ideas please.
    Many thanks in advance.
    John

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Sep 2009
    Location
    fairfax, VA
    Posts
    72
    Rep Power
    21

    Re: IR ADV 5235 OF75 JAM

    Quote Originally Posted by boopsy2007 View Post
    IR ADV 5235
    No internal finisher

    I have a canon 5235 colour copier which when on a run of 10 or more seems to jam consistently. the jam code is OF75. When the code is selected it shows no sensor location or paper source. When clearing paper jam, there is always paper coming out of delivery and one at registration. I have replaced fuser unit and paper feed driver pcb, and upgraded system software to no avail.
    Its a very unusual code which isn't in the manual so i'm stumped. Any ideas please.
    Many thanks in advance.
    John
    Intermittently, the machine will display a 0F75 jam code. The 0F75 jam code references a possible issue with the ITB Assembly.



    Workaround :
    Go to Service Mode COPIER>DISPLAY>MISC and check that ITB-POS and ITB-POS2 values are within the acceptable range of -200 and +200*. If the values do not fall into this range, refer to the servicing procedures detailed in TP15 279a.pdf
    Some people may say I have a short temper, but I prefer to call it
    "A swift and assertive reaction to bullshit"

  3. #3
    Technician
    Join Date
    Mar 2011
    Location
    Stockholm
    Posts
    19
    Rep Power
    17

    Re: IR ADV 5235 OF75 JAM

    Hello, did you solve the problem?
    I have exactly the same problem..

    Kind regards Ola

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2009
    Posts
    51
    Rep Power
    20

    Re: IR ADV 5235 OF75 JAM

    Quote Originally Posted by boopsy2007 View Post
    IR ADV 5235
    No internal finisher

    I have a canon 5235 colour copier which when on a run of 10 or more seems to jam consistently. the jam code is OF75. When the code is selected it shows no sensor location or paper source. When clearing paper jam, there is always paper coming out of delivery and one at registration. I have replaced fuser unit and paper feed driver pcb, and upgraded system software to no avail.
    Its a very unusual code which isn't in the manual so i'm stumped. Any ideas please.
    Many thanks in advance.
    John
    are you sure the jam code is 0F75? There is no jam code 0F75 in service manuel. take a photo or print out a hist-report and check it.

  5. #5
    Technician
    Join Date
    Oct 2009
    Location
    Wroclaw
    Posts
    25
    Rep Power
    20

    Re: IR ADV 5235 OF75 JAM

    Quote Originally Posted by cdtw9803 View Post
    are you sure the jam code is 0F75? There is no jam code 0F75 in service manuel. take a photo or print out a hist-report and check it.
    Hi, is your problem solved ? I have exactly the same problem JAM 0F75 .

    Regards

  6. #6
    Technician
    Join Date
    Mar 2015
    Posts
    30
    Rep Power
    9

    Re: IR ADV 5235 OF75 JAM

    Randall has the correct answer. 0F75 will eventually turn into a E075, ITB psosition.

  7. #7
    Junior Member
    Join Date
    Mar 2019
    Location
    Geneva
    Posts
    1
    Rep Power
    0

    Re: IR ADV 5235 OF75 JAM

    Quote Originally Posted by bobburnsreb View Post
    Randall has the correct answer. 0F75 will eventually turn into a E075, ITB psosition.

    That 's right, befire having error code liike E0075-0003 or E075-0301, th ejam code 0F75 could be detected.
    it's a first to this erroneous code.

    Regards

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    80
    Rep Power
    0

    Re: IR ADV 5235 OF75 JAM

    Quote Originally Posted by randall View Post
    Intermittently, the machine will display a 0F75 jam code. The 0F75 jam code references a possible issue with the ITB Assembly.



    Workaround :
    Go to Service Mode COPIER>DISPLAY>MISC and check that ITB-POS and ITB-POS2 values are within the acceptable range of -200 and +200*. If the values do not fall into this range, refer to the servicing procedures detailed in TP15 279a.pdf
    If it is the ITB, then that is the more reason it allows the paper to pass through somehow. Because with E00075-003, the machine will not be ready at all.
    As an alternative, he may remove the ITB and visually inspect the position of the belt. It may gradually be slipping more to one side of the rollers holding it. The horizontal space from the tip of the rollers to the belt will appear relatively wider than the other horizontal end.

  9. #9
    Senior Tech 250+ Posts
    IR ADV 5235 OF75 JAM


    Join Date
    Jun 2013
    Location
    WI
    Posts
    296
    Rep Power
    15

    Re: IR ADV 5235 OF75 JAM

    Also, past posts, uneven floor will throw the belt off. Common on this series with that code with uneven floors, there also is past post about a repositioning of the screw that tightens the belt so it doesnt walk.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here