Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Technician



    Join Date
    Sep 2012
    Location
    Traverse City, MI
    Posts
    44
    Post Thanks / Like
    Rep Power
    10

    Web Cleaning Message won't clear - Imagepress C1

    I have a C1 and my web cleaning roller ran out, so I replaced it with a partial roll that I had acquired with a bunch of parts. The web is properly threaded between the plastic detector feelers, and when the web assembly is installed, the sensor is not being blocked. There is nothing stuck in the sensor that would be giving it a false reading.

    I have cleared the counter: COPIER > COUNTER > DRBL-1 > FX-WEB

    The web I installed is about half consumed, but it still thinks the web is low, and it gives me the E005 error code after the 3000th copy and shuts down. I can clear the code and it is good for another 3000 copies!

    Any ideas what to try next? There must be something I missed, as it was working fine before the web ran out.


  2. #2
    Field Supervisor 10,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    14,903
    Post Thanks / Like
    Rep Power
    206

    Re: Web Cleaning Message won't clear - Imagepress C1

    Quote Originally Posted by victoryprinting View Post
    I have a C1 and my web cleaning roller ran out, so I replaced it with a partial roll that I had acquired with a bunch of parts. The web is properly threaded between the plastic detector feelers, and when the web assembly is installed, the sensor is not being blocked. There is nothing stuck in the sensor that would be giving it a false reading.

    I have cleared the counter: COPIER > COUNTER > DRBL-1 > FX-WEB

    The web I installed is about half consumed, but it still thinks the web is low, and it gives me the E005 error code after the 3000th copy and shuts down. I can clear the code and it is good for another 3000 copies!

    Any ideas what to try next? There must be something I missed, as it was working fine before the web ran out.
    =========================================
    reset both counters

    In case of replacing web, reset both in the following:
    COPIER > COUNTER > MISC > FIX-WEB,
    COPIER > COUNTER >DRBL-1 > FX-WEB

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician



    Join Date
    Sep 2012
    Location
    Traverse City, MI
    Posts
    44
    Post Thanks / Like
    Rep Power
    10

    Re: Web Cleaning Message won't clear - Imagepress C1

    Quote Originally Posted by teckat View Post
    =========================================
    reset both counters

    In case of replacing web, reset both in the following:
    COPIER > COUNTER > MISC > FIX-WEB,
    COPIER > COUNTER >DRBL-1 > FX-WEB
    When I replaced the web, I also looked under COPIER > COUNTER > MISC and there was no FIX-WEB option listed. I figured that was the issue, but it is just not there.


  4. #4
    Field Supervisor 10,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    14,903
    Post Thanks / Like
    Rep Power
    206

    Re: Web Cleaning Message won't clear - Imagepress C1

    Quote Originally Posted by victoryprinting View Post
    When I replaced the web, I also looked under COPIER > COUNTER > MISC and there was no FIX-WEB option listed. I figured that was the issue, but it is just not there.

    Check the interior Fixing draw connector :-|

    wonder if that setting is for C1 +

    I hated working on this model :-[

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Junior Member
    Join Date
    Jun 2015
    Location
    Medianeira, PR
    Posts
    7
    Post Thanks / Like
    Rep Power
    0

    Question Re: Web Cleaning Message won't clear - Imagepress C1

    I'm having E005-0001 in one printer in the start and can't print.

    I'v already changed spare parts to find the solution even changed the entire Fusion Module and changed de drawer that have the fusion fixed, cleared software counters.

    I'm starting to look for poltergeists here. hehe

    (Sory for my poor english, I write only here in this forum...)

    Anyone can help-me?


  6. #6
    Field Supervisor 10,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    14,903
    Post Thanks / Like
    Rep Power
    206

    Re: Web Cleaning Message won't clear - Imagepress C1

    Quote Originally Posted by Liebendeinsam View Post
    I'm having E005-0001 in one printer in the start and can't print.

    I'v already changed spare parts to find the solution even changed the entire Fusion Module and changed de drawer that have the fusion fixed, cleared software counters.

    I'm starting to look for poltergeists here. hehe

    (Sory for my poor english, I write only here in this forum...)

    Anyone can help-me?



    Check the drawer connector for bent flat pins >>> will cause poor contact

    Replace the drawer connector located in fig.320 Fixing Feeder Assembly, item number 24:

    FM2-2622-000 Cable Drawer 2


    cable, draw 2.jpg

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Field Supervisor 500+ Posts Rachid.Akli's Avatar
    Join Date
    Oct 2011
    Location
    Algiers
    Posts
    574
    Post Thanks / Like
    Rep Power
    19

    Re: Web Cleaning Message won't clear - Imagepress C1

    Hi,

    Here is what is mentioned in the SM:

    1- E005-0000 Error in absence of the fixing web: after the fixing web level sensor has detected the absence of the web, the count exceeded 3000.

    2- E005-0001 Open circuit error of the fixing web drive solenoid.

    Reset in service mode: COPIER>FUNCTION>CLEAR>ERR

    Rachid.


    "Find a job you love and you’ll never have to work a day in your life." Nagy's father

  8. #8
    Junior Member hectech68's Avatar
    Join Date
    Jul 2014
    Location
    La Mirada, CA
    Posts
    3
    Post Thanks / Like
    Rep Power
    0

    Re: Web Cleaning Message won't clear - Imagepress C1

    The E005 will not reset untill you reset the web counter in the counter section in service mode its under the counter also the sensor flag in the web Ass'y has ro be in the inside of the web if its outside it will not reset ..
    Hector R


  9. #9
    Technician



    Join Date
    Sep 2012
    Location
    Traverse City, MI
    Posts
    44
    Post Thanks / Like
    Rep Power
    10

    Re: Web Cleaning Message won't clear - Imagepress C1

    Going back last year to my original post, I did not have the web length detector arm set properly. I put the cleaning web BETWEEN the "feelers", but it should have been placed so BOTH feelers were on the same side of the web. No more false message that the web needs replacement. (It was only half consumed.)


  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Jan 2014
    Posts
    79
    Post Thanks / Like
    Rep Power
    7

    Re: Web Cleaning Message won't clear - Imagepress C1

    the following hint has reminded in the service manual with following attachment:
    - Make sure to mount the fixing cleaning web to follow the orientation
    shown in the figure.
    - Make sure to make the mutual positions of the fixing cleaning web [1] and
    the web length detection arm [2] as in the figure.
    - Make sure not to make slack of the fixing cleaning web.

    Attached Files Attached Files

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here