Thanks: 
Likes: 
Dislikes: Originally Posted by butitsmyfirstday
Ok,
Now take one of those gradation prints, place on Glass and make a copy of it.
See if those digital tracks appeare_?
Ok,
Now take one of those gradation prints, place on Glass and make a copy of it.
See if those digital tracks appeare_?
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Ok, I tried that and the tracks still appear...
Print out P PRINT settings
Clear RCON, power of _on
Re-Input the RCON Settings
Test again
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Ok, I'll try that in the morning and let you know how it goes. Thanks again and have a great night...
Ok
Also try to remove the S-B Sub PCB board on Main controller & reseat it.
It should be the third board down.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Ok will do...
https://www.dropbox.com/s/0t0qnwb2kh...88211.jpg?dl=0
Pic of board location
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
That could be the solution.(Main controller reseat)
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Just on copies? Firmware is first step. Ram clear the reader,do CCD adj,white levels,etc. Reseat all reader cables. Its obviously not a print engine issue...
I bet on connectors.
Reader connectors or on main controller.(J3003 Reader communication I / F connector) or reader sub pcb.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Posting Permissions
Reply With Quote
Bookmarks