Heads up IRC2020 full auto grad fails

[skynet]

Hi had to remove an internal finisher from a IRC2020 and once removed worked perfectly apart from full auto gradation. The machine displayer a message "Adjustment was stopped try again".
With no attempt to feed paper.

Auto colour mismatch and quick autograd worked so it was not the pattern reader, out of desperation I fitted the internal finisher and it did full auto grad.

Turns out someone had activated >copier>option>acc> intray

[teckat]

Hi had to remove an internal finisher from a IRC2020 and once removed worked perfectly apart from full auto gradation. The machine displayer a message "Adjustment was stopped try again".
With no attempt to feed paper.

Auto colour mismatch and quick autograd worked so it was not the pattern reader, out of desperation I fitted the internal finisher and it did full auto grad.

Turns out someone had activated >copier>option>acc> intray

Watch out for those "Ghost Technicians" they pop up without any warning.