Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Technician Babelman's Avatar
    Join Date
    Dec 2015
    Location
    Gibraltar
    Posts
    30
    Rep Power
    17

    Canon IRA C4025i internal finisher

    Hi I am getting a jam message, indicating in internal finisher but can't see anything, I know very little about these. Before this the copies where coming where coming out crumpled and it has a new fixing unit.Very grateful for any help

    L CODE P
    02 1400 00
    00 0A0A 00
    00 0100 01

  2. #2
    Technician rayaeek's Avatar
    Join Date
    Apr 2015
    Posts
    15
    Rep Power
    19

    Re: Canon IRA C4025i internal finisher

    . .. nns

    Sent from my SM-G901F using Tapatalk

  3. #3
    Technician rayaeek's Avatar
    Join Date
    Apr 2015
    Posts
    15
    Rep Power
    19

    Re: Canon IRA C4025i internal finisher

    Ensure the stack tray hasn't gone beyond upper limit. Lower tray down manually and restart.

    Sent from my SM-G901F using Tapatalk

  4. #4
    Technician Babelman's Avatar
    Join Date
    Dec 2015
    Location
    Gibraltar
    Posts
    30
    Rep Power
    17

    Re: Canon IRA C4025i internal finisher

    Quote Originally Posted by rayaeek View Post
    Ensure the stack tray hasn't gone beyond upper limit. Lower tray down manually and restart.

    Sent from my SM-G901F using Tapatalk

    Thanks what is the best way to do this, as I am a beginner..

  5. #5
    Service Manager 1,000+ Posts
    Canon IRA C4025i internal finisher

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64

    Re: Canon IRA C4025i internal finisher

    there is an opening on the under side of the tray in the rear corner. You can use your finger or a small flatblade to push the gear gently toward the front of the copier to release it and lower it down.
    Accidents don't just happen. They must be carelessly planned.

  6. #6
    Technician Babelman's Avatar
    Join Date
    Dec 2015
    Location
    Gibraltar
    Posts
    30
    Rep Power
    17

    Re: Canon IRA C4025i internal finisher

    Quote Originally Posted by charm5496 View Post
    there is an opening on the under side of the tray in the rear corner. You can use your finger or a small flatblade to push the gear gently toward the front of the copier to release it and lower it down.
    Great tip thanks,now have E0532-0001 have read what says in service mode, just dont understand the terminology

  7. #7
    Field Supervisor 500+ Posts roho's Avatar
    Join Date
    Mar 2009
    Location
    Earth
    Posts
    844
    Rep Power
    43

    Re: Canon IRA C4025i internal finisher

    Chances are you need to split the finisher and put everything back to home position. I'd also be upgrading firmware. These finishers can get out of position after a jam. Check to see if the gripper is moving forward enough to allow the stapler to move to home position on boot up. You can remove the inner covers of the finisher and defeat the door switches for observation.

  8. #8
    Service Manager 1,000+ Posts
    Canon IRA C4025i internal finisher

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,388
    Rep Power
    64

    Re: Canon IRA C4025i internal finisher

    yeah, these little finishers can jump track and get out of alignment rather quickly. Like roho said, you are going to have to remove it from the machine and pull the top off of it so you can get the fingers for paper eject, stapler and everything else back into alignment. Take your time though. Its all plastic and can be frustrating as hell when working on it.
    Accidents don't just happen. They must be carelessly planned.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here