2 side copy problem- IR 7105

[jimmycabral]

Hello, I need help from you guys: I have canon machine have problem with 2 side printing, it print offset at the trailing side around 11 mm in second side. I tried to adjust from the service mode but it don't work.
Here is the service mode i used: copier > adjust then feed-adj then i used to change the value of regis and adj-refe but it don't work. I appreciate your advice.

second side 20160630232636_00002.jpg first side 20160630232636_00001.jpg

It was printed from service mode ...copier > test> PG 31 the 2-side (1)

Cheers

JC

[mramlawi]

looks like also u have the problem on the 1st side try another drawer some times drawers make problems , try to use the bypass 2 sided and tell me what the result.

[jimmycabral]

Here is the result from the bypass. The right part of the image is the leading edge and it is offset around 11mm i do some adjustment but it don't work:

result from : copier > test >PG

type: 31
pg-pick: 6
2-side: 1



back Side 2 20160702165104_00001.jpg front side 1 20160702165104_00002.jpg

thanks for any input.

JC

[songela]

I suppose the leading edge should be on the left side of the image for a Canon copier because the scanning lamp is o the left of the platen glass and cans from LEFT to RIGHT. Vice versa could be true for Xerox, may be.

[jimmycabral]

This offset image happen only in 2 side copy or print. In one side copy/print the position of image no problem. Anyone can help me on how to set the image position in duplex printing?

thanks

JC