Canon IRAdv 8105i Send option is missing after Replacing HDD

**niyaskarimba** · 07-03-2016

One of our IR8105i machine's send option is missing when we replace the HDD and reloaded the system software through SST.

But after that the send option is missing.I already checked UI send on service mode it is 1 and also checked ST-Send on License trasfer,the license is also no trasfered.

I tried to initilize all data setting,still it is same.

Any body please advice me any other posibilities for missing the send option from the main screen.

Please go through the attached for you reference.

Thanks in advance

**teckat** · 07-03-2016

Originally Posted by niyaskarimba

One of our IR8105i machine's send option is missing when we replace the HDD and reloaded the system software through SST.

But after that the send option is missing.I already checked UI send on service mode it is 1 and also checked ST-Send on License trasfer,the license is also no trasfered.

I tried to initilize all data setting,still it is same.

Any body please advice me any other posibilities for missing the send option from the main screen.

Please go through the attached for you reference.

Thanks in advance

----------------------------------------------------------------

Make sure u registered SEND (check mark) in SST Firmware before loading.
open SST check the Registered Firmware Menu / open 8105i string / mack sure SEND is registered

Reload Firmware (choosing Overwrite All) or select under SINGLE

SEND.jpg

**niyaskarimba** · 07-05-2016

Originally Posted by teckat

----------------------------------------------------------------

Make sure u registered SEND (check mark) in SST Firmware before loading.
open SST check the Registered Firmware Menu / open 8105i string / mack sure SEND is registered

Reload Firmware (choosing Overwrite All) or select under SINGLE

SEND.jpg

I will check and update you the status.

Thank you so much for your support