Originally Posted by
kuby
This is what the manual says..
"Clean the scattered grease and excess grease on the gear
at the rear side of the host machine. Procedure is as follows.
1. Remove the Fixing Assembly.
2. Remove the Gear Cover at the rear side of the host
machine, and remove the Pressure Release Stopper and
the Pressure Release Support Plate (so that the gear is
easily cleaned).
3. Wipe off the scattered grease around the Pressure
Release Cam and the Pressure Plate with lint-free paper
moistened with alcohol.
4. Wipe off the excess grease on the side of the gear and
the shaft."
Bookmarks