Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Oct 2014
    Posts
    48
    Rep Power
    0

    ir6570 error e061

    my machine has e061 error..
    every time in the menu, in lower left menu appears "wait", after about thirteen seconds it will become erorr
    e061.
    what caused it?
    need solution

    my temporary solution
    when i see it was in "wait" i opened the rightside door, then closed it
    i still able to copy

  2. #2
    Senior Tech 1,000+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    1,269
    Rep Power
    54

    Re: ir6570 error e061

    - Replace the potential sensor unit.
    - Replace the laser scanner unit.
    - Replace the DC controller PCB.

  3. #3
    Technician Helpdeskforum's Avatar
    Join Date
    Jul 2016
    Posts
    28
    Rep Power
    16

    Re: ir6570 error e061

    check the cable from potential Sensor harness.
    some of the wires break. cause too tight cable ties

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Aug 2012
    Posts
    154
    Rep Power
    0

    Re: ir6570 error e061

    Quote Originally Posted by 813200217 View Post
    my machine has e061 error..
    every time in the menu, in lower left menu appears "wait", after about thirteen seconds it will become erorr
    e061.
    what caused it?
    need solution

    my temporary solution
    when i see it was in "wait" i opened the rightside door, then closed it
    i still able to copy
    i think you may need to change the primary corona

  5. #5
    Master Of The Obvious 10,000+ Posts
    ir6570 error e061

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: ir6570 error e061

    I think you might have a paper size mismatch from tray #1. That means that the paper size in the tray does not match the paper size programmed for it. For example, each time it expects 8 1/2" length it gets 11" length. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Aug 2011
    Location
    KAMPALA CITY
    Posts
    275
    Rep Power
    28

    Re: ir6570 error e061

    Quote Originally Posted by wassem View Post
    i think you may need to change the primary corona
    Many times when the primary corona assembly has a leakage,the above error appears more often.
    Cleaning the assembly and putting new corona wires solves the problem.
    Some times the problem is also caused by a faulty HVT pcb.
    In case you do the above and the problem still persist,you could go to service mode and change the PO setting and make necessary adjustments;ie COPIER>OPTION>PO.
    Good luck.NB Many times the service manual talks about the laser unit and corresponding units but the may not necessarily be the items in fault.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here