Originally Posted by
MunsterTech
hi,
This above machine has been causing me issues now for over 5 weeks, approx 175k colour and 15k mono. I have been onto the Canon Support desk and still the customer is causing me headaches. This is the issue and what has been done.
Customer has been complaining of CQ issues, mostly on halftones/pantones - very light but full colour coverage, pastal sort of colours. (note - customer had a fiery on this machine but got it disconnected as she wasnt happy with the quality she was getting off the rip - using a MAC) - Customer complained of very week, uneven density on the colours. I did the usual, drums, etc. Still wasnt happy, she showed some samples that looked as if it had a slight drum vibration. I replaced the ITB assy, Drums, all 3 colour devs, secondary transfer roller and compression springs and Yellow/Mag laser assy, all this last week.
She has now rang in again with CQ issues, saying that the text on some documents are blurred or not sharp enough and the CQ is not good. Any Test sheets/PG types, all come out spot on. I have showed her sky copies on all colours and the density is perfect. I am loosing sleep on this guys! I have to ring Canon again to get this esculated...any other tips before I ring Canon?
tks
Bookmarks