Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Jul 2016
    Location
    phnom penh
    Posts
    12
    Rep Power
    7

    Lightbulb Canon ir2525 Can't Start up!!!

    Dear All

    My machine Canon ir2525 /120 voltage, it can't startup. I already try to restart the machine many time, but some time it working but I can't not clear all in service mode(* 2 8 * > clear All). When I restart the machine agian it stuck again (can't start up).
    please help me to solves this problem...
    Thanks you

  2. #2
    Senior Tech 500+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    843
    Rep Power
    34

    Re: Canon ir2525 Can't Start up!!!

    Is it throwing a Error Code? You say you are doing the Clear, why?

  3. #3
    Service Manager 10,000+ Posts
    Canon ir2525 Can't Start up!!!

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,889
    Rep Power
    229

    Re: Canon ir2525 Can't Start up!!!

    Quote Originally Posted by semsros View Post
    Dear All

    My machine Canon ir2525 /120 voltage, it can't startup. I already try to restart the machine many time, but some time it working but I can't not clear all in service mode(* 2 8 * > clear All). When I restart the machine agian it stuck again (can't start up).
    please help me to solves this problem...
    Thanks you
    ==============================================

    Start with cleaning and re-seating the Boot Rom,

    re-seat connectors J210, J8112 & J8125, cut any wire ties on the related harness.


    Try to re-seat the DIMM Assembly
    There are several scenario's that may cause this condition:

    1. If the Boot Rom is not seated properly or defective.

    2. If the DC Controller is defective.
    3. If J210 (DC Cont) / J8112 (Main Cont) is not connected.
    4. If the Main Controller is defective.

    Through testing, it was found that voltage was missing off J8125 (Main Controller) when the imageRUNNER is in the blank display, green led on and no rotation state.

    On a fully working device, J8125 (Main Controller) measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 5v
    3 - 3.2v 9 - 5v
    4 - 0v 10 - 0v
    5 - 0v 11 - 24v
    6 - 0v

    When the iR is in Blank display, green led on and no rotation or if DC Controller or Boot Rom is defective or J210 or J8112 is not connected.
    J8125 measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 0v
    3 - 3.3v 9 - 0v
    4 - 0v 10 - 0v
    5 - 0v 11 - 0v
    6 - 0v


    If the imageRUNNER is in the Blank Display state and listed voltage is missing on J8125, there is no way to isolate the issue to one of the listed components.


    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Technician
    Join Date
    Jul 2016
    Location
    phnom penh
    Posts
    12
    Rep Power
    7

    Re: Canon ir2525 Can't Start up!!!

    Quote Originally Posted by kuby View Post
    Is it throwing a Error Code? You say you are doing the Clear, why?
    No Error code happend, I think many stuck document store in machine, so I try to clear all in the machine.

  5. #5
    Technician
    Join Date
    Jul 2016
    Location
    phnom penh
    Posts
    12
    Rep Power
    7

    Re: Canon ir2525 Can't Start up!!!

    Quote Originally Posted by teckat View Post
    ==============================================

    Start with cleaning and re-seating the Boot Rom,

    re-seat connectors J210, J8112 & J8125, cut any wire ties on the related harness.


    Try to re-seat the DIMM Assembly
    There are several scenario's that may cause this condition:

    1. If the Boot Rom is not seated properly or defective.

    2. If the DC Controller is defective.
    3. If J210 (DC Cont) / J8112 (Main Cont) is not connected.
    4. If the Main Controller is defective.

    Through testing, it was found that voltage was missing off J8125 (Main Controller) when the imageRUNNER is in the blank display, green led on and no rotation state.

    On a fully working device, J8125 (Main Controller) measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 5v
    3 - 3.2v 9 - 5v
    4 - 0v 10 - 0v
    5 - 0v 11 - 24v
    6 - 0v

    When the iR is in Blank display, green led on and no rotation or if DC Controller or Boot Rom is defective or J210 or J8112 is not connected.
    J8125 measures as follows:

    Pin 1 - 0v 7 - 5v
    2 - 3.2v 8 - 0v
    3 - 3.3v 9 - 0v
    4 - 0v 10 - 0v
    5 - 0v 11 - 0v
    6 - 0v


    If the imageRUNNER is in the Blank Display state and listed voltage is missing on J8125, there is no way to isolate the issue to one of the listed components.


    Thanks for your support, I try to change bootroom but still the same (Display startup Canon,but stoping) and also changed conector wire J210 too.

  6. #6
    Technician
    Join Date
    Nov 2015
    Posts
    40
    Rep Power
    8

    Re: Canon ir2525 Can't Start up!!!

    I had this problem.

    Try to disconnect (unplug) the TCP/IP cable.

  7. #7
    Technician
    Join Date
    Jul 2016
    Location
    phnom penh
    Posts
    12
    Rep Power
    7

    Red face Re: Canon ir2525 Can't Start up!!!

    Thanks you all for your support to me!

    Now the machine is working.
    After I do following support and I was eject the battery cable behind board, and then clearing all in service mode...
    it's working ... even I try to restart machine many time...

    Thanks you

  8. #8
    Trusted Tech 50+ Posts mdm7266's Avatar
    Join Date
    Dec 2007
    Posts
    91
    Rep Power
    24

    Re: Canon ir2525 Can't Start up!!!

    Quote Originally Posted by apoxi View Post
    I had this problem.

    Try to disconnect (unplug) the TCP/IP cable.
    where is the tcp/ip cable located?

  9. #9
    Trusted Tech 50+ Posts mdm7266's Avatar
    Join Date
    Dec 2007
    Posts
    91
    Rep Power
    24

    Re: Canon ir2525 Can't Start up!!!

    Quote Originally Posted by semsros View Post
    Dear All

    My machine Canon ir2525 /120 voltage, it can't startup. I already try to restart the machine many time, but some time it working but I can't not clear all in service mode(* 2 8 * > clear All). When I restart the machine agian it stuck again (can't start up).
    please help me to solves this problem...
    Thanks you
    How did you solved the problem? what did you do?

  10. #10
    Junior Member
    Join Date
    Aug 2017
    Posts
    9
    Rep Power
    0

    Re: Canon ir2525 Can't Start up!!!

    Quote Originally Posted by semsros View Post
    Thanks you all for your support to me!

    Now the machine is working.
    After I do following support and I was eject the battery cable behind board, and then clearing all in service mode...
    it's working ... even I try to restart machine many time...

    Thanks you

    mr. can you show me, where a located the batttery cable

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here