Blank Paper With Print and Copy iR2530
Dear all
My machine Canon ir2530 (220voltage), it is running normally (not jam or Error code) but print and copy all blank paper out put.
I already changed:
1. Drum unit
2. Developing unit
3. High Voltage Board
4. Laser Scanner unit
please helping me to solve this problem...
thanks you
Is the DV unit turning?
When I started servicing copiers they used toaster ovens for fusers.....I'm old
no image at all? Or foggy? (contact to transfer roller)
Originally Posted by techwurk
Yes, Developer is running normally
Is blank, it is looking like Developing don't provide the toner...
Take a look at the hopper assembly, the one piece with a coupling gear can become deformed and disengaged, I've had one issue like that, I believe it was blank prints as well, no error codes from what I can remember.
You will have to remove the finisher, if there is one, a host of panels, dev, drum and laser to get to the hopper. The one piece that fits in the back recess has a piece with gears, tends to get bent away and not drive. In my case I had two machines to compare, found the dev level practically empty on the one in question.
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks