how to replace and config in service mode for ir3300 heating element ? thanks.

[lithium898]

code = e001-002

First i try to err clearing in service mode but still showing

electric wire = OK
fuser film = OK
Thermal fuse = maybe OK..
heating element = broke

*28*

analog = temp 31 / HUM 69 / ABS HUM 1963 / DR TEMP 29 / FIX C 38 / FIX E 310


now.. I replaced the heating element already but err code still showing

thanks all friend...best regards

[kuby]

After you replaced the element did you clear in service mode

[lithium898]

After you replaced the element did you clear in service mode

yes i did..

[IndoCE]

code = e001-002

First i try to err clearing in service mode but still showing

electric wire = OK
fuser film = OK
Thermal fuse = maybe OK..
heating element = broke

*28*

analog = temp 31 / HUM 69 / ABS HUM 1963 / DR TEMP 29 / FIX C 38 / FIX E 310


now.. I replaced the heating element already but err code still showing

thanks all friend...best regards

Fix e 310 !!!!
Replace DC board

[lithium898]

Fix e 310 !!!!
Replace DC board

But.. I changed the working normal heating unit of another one .. it works

[IndoCE]

But.. I changed the working normal heating unit of another one .. it works

Err 001 sub 002 about resistance subthermistor ... short or dc board misread the resistance from subthermistor

[Hopper]

yes i did..

What were the key strokes you used? Did you do ERR clear?