Results 1 to 6 of 6
  1. #1
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    770
    Rep Power
    20

    Canon Advance c7055 error:000004-0801

    The machine was working normally after an hour something blowed and a smell burned things ,then the machine didnt turned on again. So we noticed that the power supply is the burned,i changedit with another one , it gave me e:000004-0801 ,i also changed it woth another power supply same code

    Distinguished road makes you jewel in rough

  2. #2
    Field Supervisor 500+ Posts dan7777's Avatar
    Join Date
    Dec 2012
    Location
    Bristol
    Posts
    502
    Rep Power
    18

    Re: Canon Advance c7055 error:000004-0801

    Quote Originally Posted by mramlawi View Post
    The machine was working normally after an hour something blowed and a smell burned things ,then the machine didnt turned on again. So we noticed that the power supply is the burned,i changedit with another one , it gave me e:000004-0801 ,i also changed it woth another power supply same code
    I don't have my manual with me but check to see if any scraps of paper are in the fuser connector. I get those fuser codes on the 72xx machines more. With a burnt power supply you may have a short somewhere.


  3. #3
    Senior Tech 100+ Posts onlyinnewfoundland's Avatar
    Join Date
    Apr 2013
    Posts
    147
    Rep Power
    11

    Re: Canon Advance c7055 error:000004-0801

    Might want to check the halogen lamp in the lower fixing unit...they get weak on the connector sides if the modified bushings haven't been installed. They do wear out - I have had a few fall apart on me when I go to replace the lower fixing belt.


  4. #4
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    770
    Rep Power
    20

    Re: Canon Advance c7055 error:000004-0801

    thanks for your response , actually i looked at the power supply pcb it was 120V and i replaced it with 220V cos of that the error occur ,so now i want to ask if can any one help me is there is anyway to change the copier from 120v to 220V what should i replace instead power supply

    Distinguished road makes you jewel in rough

  5. #5
    Field Supervisor 500+ Posts dan7777's Avatar
    Join Date
    Dec 2012
    Location
    Bristol
    Posts
    502
    Rep Power
    18

    Re: Canon Advance c7055 error:000004-0801

    Quote Originally Posted by mramlawi View Post
    thanks for your response , actually i looked at the power supply pcb it was 120V and i replaced it with 220V cos of that the error occur ,so now i want to ask if can any one help me is there is anyway to change the copier from 120v to 220V what should i replace instead power supply
    If your wall outlet is 120 you need a 120 power supply. Same for 220. Get the parts for the wall outlet voltage. When I get that code I go and look at the voltage/temp in tech mode and see if it goes up. No change usually means a bad connection for the fuser connector to the back connector. It could be a power supply but I have serviced a dozen or more of those machines for years and never had a bad power supply. Mine are 120v. It is possible to order wrong power supply as it may list two or three.


  6. #6
    Field Supervisor 500+ Posts vigour's Avatar
    Join Date
    Aug 2010
    Posts
    980
    Rep Power
    25

    Re: Canon Advance c7055 error:000004-0801

    You took the power supply from a 9000.
    9000's run on 208 volts, The fuser lamp is also different from the 7000, so you should not swop fusers between 7000 and 9000


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here