DENSITY

[q555]

hi,

does anyone know how to achieve the appropriate density

Model: iR C3580


thank you

[roho]

You don't adjust these values, they are for reference if there's a print quality problem or error code. Have good drum units in and the device will do it's own ATR control and then it will adjust these values as needed. You can run an autogradation as well, that operation can update some of these values.

[q555]

You don't adjust these values, they are for reference if there's a print quality problem or error code. Have good drum units in and the device will do it's own ATR control and then it will adjust these values as needed. You can run an autogradation as well, that operation can update some of these values.

I see

thank you for the information