Canon PC 11 registration clutch needed

**tonerjockey** · 11-05-2016

i fiddled and fiddled with it and it went from slipping to sticking etc. flustered. if i can get a registration clutch, and possibly a solenoid that would be cool. and it also needs a upper fuser roller which i dont love doing but hey. especially on a dresser with the guys heater blowing hot air on me when its already hot out. any leads i would appreciate. thank you, Jiim

**copier tech** · 11-05-2016

Wow this is an old model!

I used to strip & clean the reg clutch with wd40 that always did the trick!

Keep an out out on ebay you may find a fuser unit on there.

**tonerjockey** · 11-05-2016

Originally Posted by copier tech

Wow this is an old model!

I used to strip & clean the reg clutch with wd40 that always did the trick!

Keep an out out on ebay you may find a fuser unit on there.

Hello, yes i took it apart and used silicon greese as i was lazy to go out to the van and look for patrolium grease. i then sprayed it with WD 40 and then even tried silicon oil. fuser oil. some days things just dont improve. others, things just go smooth. wish we could predict it. i think its related to being under stress.

i had a source i think a while back for a fuser roller, but unless i can fix the feeding issue, no sense. have a nice weekend.

**teckat** · 11-06-2016

Originally Posted by tonerjockey

Hello, yes i took it apart and used silicon greese as i was lazy to go out to the van and look for patrolium grease. i then sprayed it with WD 40 and then even tried silicon oil. fuser oil. some days things just dont improve. others, things just go smooth. wish we could predict it. i think its related to being under stress.

i had a source i think a while back for a fuser roller, but unless i can fix the feeding issue, no sense. have a nice weekend.

PC11= R.I.P

FB1-1474-020

https://www.mediaform.com.au/cart.ph...=581f863364f68

WCP Laser Printer Parts & More