Thanks:
0
Likes:
0
Dislikes:
0
-
Canon irA8085
Have a canon ir8085 with strange problem.
Paper stop at PS28 sensor and stay there without any jam or error code.
Get message that print or copy is susspend.
Machine can work for day or two without any problem and then again have same issue.
-
-
Re: Canon irA8085
Tried from all trays.
Did not try to remove finisher.
Confusing is that there is no any jam code.
-
Re: Canon irA8085
When you go into service mode and check your jam history, does it log anything?
If not, try updating firmware to see if it will show you the code if it jams again...
-
Re: Canon irA8085
There is no jam or error code.
Paper just stay under ps28 and there is message "printing" for about 30 sec.
Then get message sussped.
And still no message for paper jam.
DC-con is 34.01 so will try with newer firmware.
-
Re: Canon irA8085
What is the latest SW level for ir Advanced 8085?
-
Senior Tech
100+ Posts
- Rep Power
- 25
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks