Canon ir-adv 8095 delay jam 1011

[Arcadian]

The weird that i tried the finisher on another machine and theres no jam

possible it might be the bridge area, clean those rollers they get build up!!

warm water on a soft towel and scrub those rollers upper and lower.

good luck

[mramlawi]

possible it might be the bridge area, clean those rollers they get build up!!

warm water on a soft towel and scrub those rollers upper and lower.

good luck

I have replaced the bushing and installed the tunning one try it and think it solved

[Arcadian]

I have replaced the bushing and installed the tunning one try it and think it solved

excellent, im working on these alot

[Canuck]

Here is the mod to address the issue..10-11 jams.pdf