Canon iradvance c7055 service technican password

[mramlawi]

Dears,

i have a refurbished machine c7055 unable to ebter service mode by *28* so i tried *49* it works theres a password and i dont know it ,i replaced main cont 1 ,hdd and still unable to enter service mode without oassword, tried to make software but my files corrupted.

[Jag_97470]

Did you try pushing settings/registration > 2 & 8 at the same time > setting/registration?

[20 year tech]

try 11111111 if that does not work you may want to try initialize all data

[mramlawi]

Yes i tried 28 and didnt enter the service mode ,only it works when i pressed 49
also i tried initialized all data and still the same ill try 1 thanks.

[dan7777]

Dears,

i have a refurbished machine c7055 unable to ebter service mode by *28* so i tried *49* it works theres a password and i dont know it ,i replaced main cont 1 ,hdd and still unable to enter service mode without oassword, tried to make software but my files corrupted.

To change it back to 2 and 8 it is in level 2 copier option fnc sw

SVMD-ENT Setting of entry method to service mode
Lv.2 Details To set the way to get in service mode to prevent information leak.
Use case As needed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: [Settings/Registration] - Pressing [2] and [8] at the same time -
[Settings/Registration]
1: [Settings/Registration] - Pressing [4] and [9] at the same time -
[Settings/Registration]

[mramlawi]

Solved , by clearing the techncian password using my usb