canon IR 2830

[1stcavvet]

I know this sounds like a trick question, How do you get the pick up roller off the spindle Tray 1 and 2 The feed and sep are a clip on the roller, push it and pull the tire off the spindle. Not so with the pick up, a little skinny roller with a ribbed rubber area, smooth bore going straight thru. I see a sort of clip push it pull it ??? WHAT please let me know THANKS and MERRY CHRISTMAS

[copier tech]

If there is a tiny metal clip first pull this off, then you can remove the pick up roller in the same way as the feed/sep.

The metal clip was a Canon mod to stop the pick up roller falling off!