Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: canon IR 2830

  1. #1
    Senior Tech 100+ Posts 1stcavvet's Avatar
    Join Date
    Apr 2015
    Location
    Sterling Heights, Michigan
    Posts
    158
    Rep Power
    7

    canon IR 2830

    I know this sounds like a trick question, How do you get the pick up roller off the spindle Tray 1 and 2 The feed and sep are a clip on the roller, push it and pull the tire off the spindle. Not so with the pick up, a little skinny roller with a ribbed rubber area, smooth bore going straight thru. I see a sort of clip push it pull it ??? WHAT please let me know THANKS and MERRY CHRISTMAS


  2. #2
    Field Service Engineer 1,000+ Posts
    canon IR 2830

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,197
    Rep Power
    39

    Re: canon IR 2830

    If there is a tiny metal clip first pull this off, then you can remove the pick up roller in the same way as the feed/sep.

    The metal clip was a Canon mod to stop the pick up roller falling off!

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here