Thanks: 
Likes: 
Dislikes: Machine right Deck mostly jam with jam code 0107.
Pickup roller ,feed roller,speration rollers all replace .
But problem is still there.
I checked right Deck feeding unit in other machine ,it works fine.
Someone help me thank in advance.
Machine right Deck mostly jam with jam code 0107.
Pickup roller ,feed roller,speration rollers all replace .
But problem is still there.
I checked right Deck feeding unit in other machine ,it works fine.
Someone help me thank in advance.
ARUN KUMAR MISHRA
Originally Posted by ARUN MISHRA
check supply voltage & connectors from 0107 issue machine to unit & driver pcb
Right deck pickup motor M11
J104-DC controller PCB
A5, A6 GND
Set the meter range to 30 VDC, and connect the meter probes to the
connectors on the DC controller PCB of the motor in question as
indicated above.
Does the voltage change from 24 to 0 V when the Start
key is pressed?
if YES: Check the wiring and the motor driver PCB; if normal, replace the
motor.
if NO: Replace the DC controller PCB.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
dear teckat
I have an error in finisher V1 57a-8001
how to adjust paper edge area sensor or paper edge stopper shift motor
https://www.dropbox.com/s/dlx0mjb66h...v1-sm.pdf?dl=0
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
thank you very much for your continuous support
and for your gift, it solved the error.
raouf
Welcome
🍺
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Posting Permissions
Reply With Quote
Bookmarks