If your IPF wants to change printhead or perform cleaning, and nozzle check is ok, you can still print without changing printhead using this method>
- Sent jobs in regular mode using print plugin in some directory on canon HDD
- Turn off printer
- Start printer in service mode
- Activate job using printer control panel
I already made about 100m2 canvas prints using this method. I noticed that when printhead is old more than 730 days, printer wants to change it. My printheads made excellent nozzle check without any clog on result. I also notice that jobs saved in HDD are limited I didn't count but maybe is about 100.
I hope this solution will help somebody!
Bookmarks