Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 17
Problems image press c700 with envelops Dl
Hello everyone.
I have a problem in image press c700 with envelopes Dl format.
All envelopes are tapped and folded in the flap.
I have checked that it is in the area of the machine FIGURE 118
REVERSE DELIVERY DOOR ASSEMBLY but I do not see anything.
Has anyone had this problem?
Thank you
-
Re: Problems image press c700 with envelops Dl
Below is my notes when I was experiencing this. I taped milars to the describe plate below were the envelope edge went over it.
imagePRESS C60/C700/C800 Finisher jamming Not all time unknown Envelopes nicking flap
Added milar to REVERSE DELIVERY DOOR ASSEMBLY section 118 in part manual. The part is just below the part#17 and slightly left.
Trying to find picture.
Hope this helps
Sniff List
-
Technician
- Rep Power
- 17
Re: Problems image press c700 with envelops Dl
Thank you very much.I'll try.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks