Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member Machie's Avatar
    Join Date
    Aug 2016
    Posts
    4
    Rep Power
    0

    Canon ImagePass-B1

    Is there a master password for ImagePass-B1? I am trying to go to the setup but unfortunately that the language set in the ImagePass is German. I was able to go to Run Setup to initialised the unit to factory default and entered the password Fiery.1, but it seems that the previous user of the machine have changed the password. I would appreciate if somebody can help me to set the unit to factory default. Thanks a lot Guys.

  2. #2
    Field Supervisor 500+ Posts
    Canon ImagePass-B1

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45

    Re: Canon ImagePass-B1

    password.zip

    Unzip this file, load it via Command Workstation into the "direct" Queue and it should print the PW in plain Text
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jan 2011
    Posts
    220
    Rep Power
    29

    Re: Canon ImagePass-B1

    Hi Hermann, in the CWS, we need to log in first to the fiery right? Usually its Fiery.1, but in his case, he dont have this password, saying it was different. How would he be able to load or import the ps file you have sent?

  4. #4
    Field Supervisor 500+ Posts
    Canon ImagePass-B1

    Herrmann's Avatar
    Join Date
    Jan 2006
    Location
    Germany, NorthRhine Westfalia
    Posts
    792
    Rep Power
    45

    Re: Canon ImagePass-B1

    if I remember correctly, you dont need to sign in as administrator; you can work as normal operator. Open top left, then import, there you can assign the printer queue. You can also set you printer driver to "LPR" ans assign the printer queue there:

    printer_queue.jpg
    If sometimes you feel a little useless, offended and depressed always remember that you were once the fastest and most victorious sperm of hundreds of millions!

  5. #5
    Service Manager 10,000+ Posts
    Canon ImagePass-B1

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon ImagePass-B1

    Quote Originally Posted by vishop View Post
    Hi Hermann, in the CWS, we need to log in first to the fiery right? Usually its Fiery.1, but in his case, he dont have this password, saying it was different. How would he be able to load or import the ps file you have sent?



    reload
    B1 firmware

    or

    • Connect your PC to the same network as the imagePASS and open a Web browser
    window.
    • In the URL field of the browser, type the IP address or DNS name of the imagePASS,
    and then press Enter.
    The IP address is listed under the Network Setup section of the Configuration page.
    • On the WebTools home page, click the Configure tab.
    • Click the Launch Configure button. Type the Administrator password for the imagePASS,
    and then click OK.
    The default Administrator password is Fiery.1.
    However, the network administrator may
    have configured a new password for the imagePASS.

    • Expand the Server item in the left panel and click Backup/Restore.
    • Click Backup Fiery Settings. Enter a file name and a location for the settings file, and
    then click Save.
    • Close the browser window.

    If you saved the imagePASS settings earlier and are ready to restore the settings to
    the system:
    • Connect your PC to the same network as the imagePASS, and open a Web browser
    window.
    • Type the IP address or DNS name of the imagePASS in the URL field, and press Enter.
    • On the WebTools home page, click the Configure tab, and then click the Launch
    Configure button.
    Now Type Fiery.1 for the password, and click OK
    • Expand the Server item in the left panel, and click Backup/Restore.
    • Click Restore Fiery Settings. At the reboot warning, click OK. Then locate and select the
    configuration file that you saved earlier, and click Open.
    • Allow the imagePASS to reboot.
    Last edited by teckat; 01-19-2017 at 11:41 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here