CANON IR3230 Finisher-S1 stuck in the top position

[suresh968]

CANON IR3230 Finisher-S1 stuck in the top position, Please help me how to it make lower. Thanks in Advance

[Tonersniffer]

Pull finisher out. Take this cover off. turn elevator motor or pulley until it is at desired lower position.
IMG_20170209_103014.jpg

hope this helps.

Tonersniffer

[dan7777]

CANON IR3230 Finisher-S1 stuck in the top position, Please help me how to it make lower. Thanks in Advance

under the tray (rear side, in the corner) there is a slit where you need to get a small flat blade screw driver in the slot to push the gear (spring loaded) away to lower the tray. Most of them are the same. Could not find a picture for you.

[suresh968]

thanks brother but Not able to find the slit, in the rear side of the corner

under the tray (rear side, in the corner) there is a slit where you need to get a small flat blade screw driver in the slot to push the gear (spring loaded) away to lower the tray. Most of them are the same. Could not find a picture for you.

[skynet]

I ♥ Youtube.