Having copy quality issues, bias lines as well as shaded copies on front frame side. Replaced primary charge pre transfer and transfer belt. New dev unit. Please see attached pic, thank you in advance.
Having copy quality issues, bias lines as well as shaded copies on front frame side. Replaced primary charge pre transfer and transfer belt. New dev unit. Please see attached pic, thank you in advance.
looks more like a OPC issue ...when was maintenance last done on it?
What is the yield on the drum? I thought they go a long way.
I apologize as I only have two of these models out. Customer is a printer and uses the copier to its full capacity.
Thank you for the reply
Bruno.
Hi yes all OEM supplies. Going to maybe look at the wiper blade again. Has about 200K oem blade. They should go 300k.
Thanks for your help, will reply when rectified.
Going back to the basics and other suggestions. Does a system print look bad? Laser Slit dirty? Corona wires are even height?
Tonersniffer
Yes when I print counterlist the cq is bad. I replaced all corona units and T belt with OEM. I will check laser when I replace drum blade and transfer belt blade. Thanks for reply.
Bookmarks