Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Sep 2010
    Posts
    130
    Rep Power
    29

    Canon IR 2530 curvy line backgrounds

    Hello all,
    Pls has anyone experienced or can help with this. See the attached page count printout. The lines appear on copies and prints and even on the mag roll. I have changed the dev assy with a working one. Worked well while at customer's place only to be called back after I got back to office. Pls somebody help me
    Attached Files Attached Files

  2. #2
    Service Manager 10,000+ Posts
    Canon IR 2530 curvy line backgrounds

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR 2530 curvy line backgrounds


    Quote Originally Posted by Doctor View Post
    Hello all,
    Pls has anyone experienced or can help with this. See the attached page count printout. The lines appear on copies and prints and even on the mag roll. I have changed the dev assy with a working one. Worked well while at customer's place only to be called back after I got back to office. Pls somebody help me

    did u check if this issue is before transfer or after transfer

    Transfer Bias/Separation Static Eliminator Bias Control

    DC bias is applied to the transfer roller and static eliminator


    BIAS
    =====DC Controller PCB

    Primary Charging Bias Control

    The machine is directly charged by the charging roller. DC bias and AC bias that stabilized
    the charge is applied to the primary charging roller.

    Constant voltage control of DC bias and AC bias

    The DC bias and AC bias control circuits on the DC controller PCB control the DC bias and
    AC bias applied to the primary charging roller to keep their voltage at the fixed level.
    Developing Bias Control
    The DC bias and AC bias are applied to the developing cylinder.

    Primary Charging

    Charging method Primary charging roller
    AC bias constant voltage control: approx. 550 to 2600Vp-p
    DC bias constant voltage control: approx. -400 to -800V
    DC bias switch control (variable according to environment
    sensor detection)

    Developing

    Developing Method= Dry one-component jumping development
    AC bias constant voltage control: approx. 800Vp-p
    DC bias control: approx. -300 to -700V
    DC bias switch control (variable according to density
    setting, environment sensor detection)
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Sep 2010
    Posts
    130
    Rep Power
    29

    Re: Canon IR 2530 curvy line backgrounds

    Thanks Mr Teckat, I will check that tomoro and get back

    Sent from my Infinix-X600-LTE using Tapatalk

  4. #4
    Senior Tech 250+ Posts madas's Avatar
    Join Date
    Aug 2008
    Location
    NZ
    Posts
    313
    Rep Power
    35

    Re: Canon IR 2530 curvy line backgrounds

    Does remind me of a main charge issue on a different brand.
    not the same but similar, have you fixed this?
    If so post the solution

    Les

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Oct 2016
    Location
    manila
    Posts
    108
    Rep Power
    0

    Re: Canon IR 2530 curvy line backgrounds

    Quote Originally Posted by Doctor View Post
    Hello all,
    Pls has anyone experienced or can help with this. See the attached page count printout. The lines appear on copies and prints and even on the mag roll. I have changed the dev assy with a working one. Worked well while at customer's place only to be called back after I got back to office. Pls somebody help me
    on my experience it would have happened when we are using not genuine toner the possible cause the old toner and new toner mixing inside the developer, you only have to do is remove the toner and clean the developer unit and clean the mag roller. and try to initiallize it the new toner going to the developer.....and try to print more copy....

  6. #6
    Master Of The Obvious 10,000+ Posts
    Canon IR 2530 curvy line backgrounds

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Canon IR 2530 curvy line backgrounds

    Quote Originally Posted by rudysemira View Post
    on my experience it would have happened when we are using not genuine toner the possible cause the old toner and new toner mixing inside the developer, you only have to do is remove the toner and clean the developer unit and clean the mag roller. and try to initiallize it the new toner going to the developer.....and try to print more copy....
    Yes. I like this solution too.

    Even if it is an OEM toner cartridge, I've had endusers dump some other brand toner into the cartridge. Bring your vacuum and a know new, un-tampered with OEM toner cartridge. Vacuum out your new developing unit and re-fill the developing unit from that new cartridge. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Sep 2010
    Posts
    130
    Rep Power
    29

    Re: Canon IR 2530 curvy line backgrounds

    Thanks all for your responses. I was only able to get access to the printer Friday. Now the patterns appear on the top quater only. And you can see it on the drum and developer unit.

    Sent from my Infinix-X600-LTE using Tapatalk

  8. #8
    Master Of The Obvious 10,000+ Posts
    Canon IR 2530 curvy line backgrounds

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Canon IR 2530 curvy line backgrounds

    Does that mean that you won 't be attempting any of the suggested solutions? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  9. #9
    Multibrands Tech 250+ Posts rapidocument's Avatar
    Join Date
    Jul 2012
    Location
    Los Angeles, CA.
    Posts
    382
    Rep Power
    27

    Re: Canon IR 2530 curvy line backgrounds

    There is a pattern there,
    I would think of the charge (primary) roller worn or contaminated.
    try another drum unit to make a test.

  10. #10
    Service Manager 10,000+ Posts
    Canon IR 2530 curvy line backgrounds

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: Canon IR 2530 curvy line backgrounds

    Quote Originally Posted by Doctor View Post
    Thanks all for your responses. I was only able to get access to the printer Friday. Now the patterns appear on the top quater only. And you can see it on the drum and developer unit.

    Sent from my Infinix-X600-LTE using Tapatalk


    Process of Elimination
    to identify an entity of interest among several ones by excluding all other entities.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here