Hello copytech,
Recently came across an issue with having to print wedding envelopes.
The size is not on the canon copier.
Model i have is Canon IR C5180
Im sorry if this is a super silly question or thread to start but any help would be best appreciated!
Originally Posted by Vegas10128
Run in Bypass Tray-----------------SELECT ON CONTROL PANEL --change the X/Y coordinates on the control panel:1) Choose Stackbypass on the control panel
2) Choose envelope (Press OK key)
3) Choose Irreg. Size
4) Put in x/y coordinants:
or in Print Driver Settings
- Printing on envelopes, do not allow more than 10 envelopes to accumulate in the output tray. Always empty the output tray once 10 envelopes have accumulated.
- You can select from the following paper sizes: <A4>, <A5>, <B5>, <Custom Size>, <COM 10>, <Monarch>, <DL>, <ISO-C5>, <ISO-B5>
- The following envelopes can be loaded into the multi-purpose tray:
- COM10 No.10: 104.7 mm × 241.3 mm
- ISO-B5: 176 mm × 250 mm
- Monarch: 98.4 mm × 190.5 mm
- ISO-C5: 162 mm × 229 mm
- DL: 110 mm × 220 mm
- Nagagata 3: 120 mm × 235 mm
- Yougatanaga 3: 120 mm × 235 mm
- Kakugata 2: 240 mm × 332 mm
Envelopes Page size Print area Top/ Bottom margins (A/B) Left/
Right margins (C/D)#10 (U. S.) 4.13 x 9.5 in. 3.73 x 8.95 in. .2 in. .275 in. #6 3⁄4 (U. S.) 3.65 x 6.5 in. 3.25 x 5.95 in. .2 in. .275 in. Monarch (U. S.) 3.875 x 7.5 in. 3.475 x 6.95 in. .2 in. .275 in. C5 162 x 229 mm 152 x 197 mm 5 mm 7 mm
25 mmDL 110 x 220 mm 100 x 206 mm 5 mm 7 mm Choukei 3 Gou 120 x 235 mm 110 x 221 mm 5 mm 7 mm Choukei 4 Gou 90 x 205 mm 80 x 191 mm 5 mm 7 mm
Set the service mode as follows:
COPIER>OPTION>BODY>ENV-SPD from 0 to 1; this runs the envelope at plain paper speed when the envelope setting is selected.
0=half speed
1-normal speed
This service mode setting was introduced with System Software v65.01.
The following are the recommended envelopes for use in the imageRUNNER:
COM10: Mailwell No. 582
Monarch: Mailwell No. 553
DL: Mailwell/Schneidersöne No. 11345
Yougata 4: Uzumaki Y-401
--Run at normal speed if envelopes are sticking--
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Run in Bypass Tray-----------------SELECT ON CONTROL PANEL --change the X/Y coordinates on the control panel:1) Choose Stackbypass on the control panel
2) Choose envelope (Press OK key)
3) Choose Irreg. Size
4) Put in x/y coordinants:
or in Print Driver Settings
- Printing on envelopes, do not allow more than 10 envelopes to accumulate in the output tray. Always empty the output tray once 10 envelopes have accumulated.
- You can select from the following paper sizes: <A4>, <A5>, <B5>, <Custom Size>, <COM 10>, <Monarch>, <DL>, <ISO-C5>, <ISO-B5>
- The following envelopes can be loaded into the multi-purpose tray:
- COM10 No.10: 104.7 mm × 241.3 mm
- ISO-B5: 176 mm × 250 mm
- Monarch: 98.4 mm × 190.5 mm
- ISO-C5: 162 mm × 229 mm
- DL: 110 mm × 220 mm
- Nagagata 3: 120 mm × 235 mm
- Yougatanaga 3: 120 mm × 235 mm
- Kakugata 2: 240 mm × 332 mm
Envelopes Page size Print area Top/ Bottom margins (A/B) Left/
Right margins (C/D)#10 (U. S.) 4.13 x 9.5 in. 3.73 x 8.95 in. .2 in. .275 in. #6 3⁄4 (U. S.) 3.65 x 6.5 in. 3.25 x 5.95 in. .2 in. .275 in. Monarch (U. S.) 3.875 x 7.5 in. 3.475 x 6.95 in. .2 in. .275 in. C5 162 x 229 mm 152 x 197 mm 5 mm 7 mm
25 mmDL 110 x 220 mm 100 x 206 mm 5 mm 7 mm Choukei 3 Gou 120 x 235 mm 110 x 221 mm 5 mm 7 mm Choukei 4 Gou 90 x 205 mm 80 x 191 mm 5 mm 7 mm
Set the service mode as follows:
COPIER>OPTION>BODY>ENV-SPD from 0 to 1; this runs the envelope at plain paper speed when the envelope setting is selected.
0=half speed
1-normal speed
This service mode setting was introduced with System Software v65.01.
The following are the recommended envelopes for use in the imageRUNNER:
COM10: Mailwell No. 582
Monarch: Mailwell No. 553
DL: Mailwell/Schneidersöne No. 11345
Yougata 4: Uzumaki Y-401
Perfect! Thank you very much,
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks