Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 16
Canon IR C5185 - Dlife-SW
Hi: I read on this board how to set the drum life on or off to display in the setup area.
I got in there and found the section that has the Dlife-SW switch in it but no matter what I do I can't get the numbers to change.
Will someone please tell me how to change the number to 1 so it will display?
Now before you think bad of me I have tried to touch the numbers to see if the screen will allow change and nothing happens. Also I see a +/- on the bottom assuming that will light up so I can change the numbers but I can't get it to light.
Which number am I supposed to change? The body number the parenthesis number both?
Any help appreciated
Thanks
DLIFE.jpg
-
Technician
- Rep Power
- 35
Re: Canon IR C5185 - Dlife-SW
you change the number in the first column, you touch it then change it to a zero or a one. Then if there is an ok button use that. I hope this helps.
-
Technician
- Rep Power
- 16
Re: Canon IR C5185 - Dlife-SW
Thank you for your response.
I found that when I click on the title dwlife-sw then select the number 1 from the keypad to the right it makes the necessary number change.
Again thanks for your help
-
Technician
- Rep Power
- 35
Re: Canon IR C5185 - Dlife-SW
Don't forget to hit the star button if you liked my suggestion.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks