Hi, we have iR-ADV 8205 and just changed the cleaning web and now haveing small toner marks on pages I'm very new to Canon printers
Thanks
Hi, we have iR-ADV 8205 and just changed the cleaning web and now haveing small toner marks on pages I'm very new to Canon printers
Thanks
Hi, Thanks here is photo it skips some pages the mark but will also show up on duplex printing I have not look at fixing inlet guide can that be cleaned with alcohol?
Thanks
IMG_20170215_144408.jpg
Thanks for all the help it also does on single sided printing it started right after we changed the cleaning web
Last edited by QC91; 02-20-2017 at 01:05 AM.
To go to Service Mode Classic Level 1 follow the steps bellow:
1) Select Settings/Registration
2) Press 2 & 8 at the same time
3) Select Settings/Registration
To go to Service Mode level 2, go to Service Mode level 1 and then:
1) Select Settings/Registration.
2) Select 2.
Go to Service Mode follow the steps bellow:
1) Select Settings/Registration
2) Press 2 & 8 at the same time
3) Select Settings/Registration
4) Select Mode List
5) Select Copier
6) Select Option
7) Select FNC-SW
8) Highlight [Level 1] to toggle between level 1 and level 2.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks