We have error code E000194-0102-05 on the printer. This is the ITB (Image Transfer Belt)
The tech manual say you need to replace the ITB - but we are almost 100% sure that the belt is OK (!?)
Any idea if this can be a something else ??
Unfortunately this is pretty much the worst code to get on this rig...
I have a file here that has a workflow procedure. This can be a number of problems, ITB, Patch Sensor, Laser, etc.
If I can host it, I can get it to you - it's pretty useful.
Turn the machine on with a door open, set AINR-OFF set to 1 in service mode >copier>function>install. Close door and see what it does. Try running AT-IMG-X if the machine gets to ready. If that fails, you're probably dealing with a laser problem. If you can manage to get the machine to ready, also worth checking a PG6 test print and look at the grid, that will probably reveal the issue. If the grid is all out of whack, then you have a problem with worn ITB parts, dirty patch sensor, or one of your laser is done.
Not sure how much this helps you, but here is the workflow file that I have - feel free to share.