Canon ir avd 8105 e004-0102

[tinnyjay]

Hi!
When i was changing uppper fuser roller, wrongly i put wire of main thermistor in cleaning web sensor's wire and machine show E004-0102.
As SM said its a problem on IH POWER SUPPLY PCB ASS'Y.
I have removed all power supply but cant find by Canon codes which one is the one i need.
Part codes are different as SM, so i have thesepart numbers in my machine:
FK27702
FM4-1086
FK2-6447
FK2-7356

Which one do i have to change or repair.
DSC_0024.JPGDSC_0025.JPGDSC_0026.JPGDSC_0027.JPG

Any help i'll appreciate.
Thank you

[Rachid.Akli]

Hi,

According to your explanation, i would have changed the DC controller PCB.

The fixing power supply PCB (IH power supply) has the following number: FM4-1092-000.


Rachid.

Fixing power supply Position.pdf
IH POWER SUPPLY PCB ASS'Y.pdf

[tinnyjay]

Hi,

According to your explanation, i would have changed the DC controller PCB.

The fixing power supply PCB (IH power supply) has the following number: FM4-1092-000.


Rachid.

Fixing power supply Position.pdf
IH POWER SUPPLY PCB ASS'Y.pdf

There is no board with that part number.
Therefore i uploaded photos.

[Rachid.Akli]

There is no board with that part number.
Therefore i uploaded photos.

Hi,

Part numbers shown on PCBs may be different from the ones of the part catalog. I always take into account the Part catalog.

Rachid.

[teckat]

Hi!
When i was changing uppper fuser roller, wrongly i put wire of main thermistor in cleaning web sensor's wire and machine show E004-0102.
As SM said its a problem on IH POWER SUPPLY PCB ASS'Y.
I have removed all power supply but cant find by Canon codes which one is the one i need.
Part codes are different as SM, so i have thesepart numbers in my machine:
FK27702
FM4-1086
FK2-6447
FK2-7356

Which one do i have to change or repair.
DSC_0024.JPGDSC_0025.JPGDSC_0026.JPGDSC_0027.JPG

Any help i'll appreciate.
Thank you

---

IH POWER SUPPLY PCB ASS'Y is the (Fixing Power Supply) has Four Connections
J500 2pin
J501 #pin
J502 19pin
J510 7pin
PCB10.jpg


Remember to clear the error in Service Mode>COPIER>FUNCTION>CLEAR>ERROR

see article below------Main Driver PCB was fix



E004 -0102 = Fixing Power Supply Error


Remedy = Replace the Fixing Power Supply PCB (PCB10).
Replace= Main Driver PCB (PCB2).

Description Fixing current error.

FM4-1092-000===IH POWER SUPPLY PCB ASS'Y is the (Fixing Power Supply)

---

imageRUNNER ADVANCE 8085 / 8095 / 8105 / 8205 / 8285 / 8295

Title : E004-0102 Error Code

Error : After working on the fuser unit, pico fuse FU15 on the Main Driver PCB (PCB 2) keeps blowing and causing error code E004-0102. Workaround : For this case, connector J3202 for TP1 - Thermal Switch 1 and connector J3207 for PS45 - the Cleaning Web Level Sensor got switched around. Connector J3202 is a 3 pin connector but only has two wires. Connector J3207 is also a 3 pin connector which has three wires. Once the devices were plugged into the correct connectors of the fuser unit and the Main Driver PCB replaced, =====FM4-1083-000 Main Driver pcb the pico fuse FU15 no longer opened up on the Main Driver PCB. Refer to illustrations below for further reference;

[legion1996]

I have this problem un adv8095 .

[teckat]

I have this problem un adv8095 .

---

See above 😱

[legion1996]

---

See above 😱

Gracias, me ha servido de mucho, logré restablecer el equipo , cambié las dos tarjetas que menciona la publicación y todo funcióna correctamente. Saludos y gracias chicos

[teckat]

Gracias, me ha servido de mucho, logré restablecer el equipo , cambié las dos tarjetas que menciona la publicación y todo funcióna correctamente. Saludos y gracias chicos

ole.jpg

[tinnyjay]

ole.jpg

Teckat, i had to change Dc Controller to fix it.
Bye