Results 1 to 2 of 2
  1. #1
    Senior Technician 50+ Posts mrfixit's Avatar
    Join Date
    Sep 2007
    Location
    Salem, MA
    Posts
    79
    Post Thanks / Like
    Rep Power
    20

    IR Adv 4025 Won't Recognize Letter Paper

    I have a 4025 that won't recognize letter paper off the glass, it recognizes letter R, legal and ledger fine though. I have tried swapping the size sensor, adf and copy glass to no avail. I have also checked all the paper settings in service mode that cause letter to read as ledger and all are fine. Has anyone run into this problem before.


  2. #2
    Field Supervisor 10,000+ Posts


    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    14,995
    Post Thanks / Like
    Rep Power
    206

    Re: IR Adv 4025 Won't Recognize Letter Paper

    Quote Originally Posted by mrfixit View Post
    I have a 4025 that won't recognize letter paper off the glass, it recognizes letter R, legal and ledger fine though. I have tried swapping the size sensor, adf and copy glass to no avail. I have also checked all the paper settings in service mode that cause letter to read as ledger and all are fine. Has anyone run into this problem before.

    SCANSLCT ON/OFF of scan area calculate function

    COPIER>OPTION>FNC-SW

    go in Level 2
    Details = To set ON/OFF of the function to calculate scanning area from the
    specified paper size.

    When the paper size is larger than the original size, selecting ON reduces productivity because the scanning area gets larger.
    Use case = When matching the scanning area with the paper size.
    Adj/set/operate method
    1) Enter the setting value, and then press OK key.
    2) Turn OFF/ON the main power switch.

    Display/adj/set range = 0 to 1
    0: OFF (calculated from the detected original size)
    1: ON (calculated from the specified paper size)

    ================================================== ==================

    SENS-CNF = Setting of original detection size.
    go in Level 2= Details = To set original detection size according to AB configuration/Inch
    configuration/A configuration.
    Select 1 (Inch configuration) for Inch configuration/A configuration machine.
    Use case When replacing the CCD unit (CCD PCB)/clearing RAM data.

    Adj/set/operate method

    1) Enter the setting value, and then press OK key.
    2) Turn OFF/ON the main power switch.

    Display/adj/set range = 0 to 1
    0: AB configuration,
    1: Inch configuration

    Default value 0

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here