IR Adv 8105 E001-002 on A5, B5 and A4-R

[tinnyjay]

Hi!
Today i am facing a strange problem with my machine.
Printing in A4 and A3 i dont have any issue, but printing small formats like B5, A5 even A4-R, machine after 2-3 minutes on printing, shows me E001-002.
I changed the main thermistor but nothing new.
Temperature on main thermistor shows 192-202 grade celcius (when printing) but in edges of fuser roller, sub-thermistor goes fast to 230 grade celcius and i got the error code.
Checked and inspected but could not find any issue physically.
Any help i'll appreciate.
Thank you

[copier tech]

Replace the sub thermistor as like you say that is the one giving the false reading.

[tinnyjay]

Replace the sub thermistor as like you say that is the one giving the false reading.

I swaped thermistors and its the same ... still Fix-UE reading high temperatures.

[David Morrison]

I got an E001-0003 for a fixing film that wasn't seated properly. I know your code is different, but still maybe worth checking?

Sent from my SM-P580 using Tapatalk

[David Morrison]

Oh wait, that doesn't have a film, does it? Wrong machine.

Sent from my SM-P580 using Tapatalk

[aco.bk]

Using OEM or Compatible upper roller????Already see that on NonOem roller.

[copier tech]

I agree, if you have replaced (or swapped) all thermistors then i'd look at the fixing roller, especially if it's non OEM!

[rudysemira]

I agree, if you have replaced (or swapped) all thermistors then i'd look at the fixing roller, especially if it's non OEM!

have you check the thermostat? thermostat it can also control the heat temperature if overheat detect from hot roller that is automatically switch off do not just focus on thermistor, the two parts was designed to protect for overheating......

[dan7777]

Hi!
Today i am facing a strange problem with my machine.
Printing in A4 and A3 i dont have any issue, but printing small formats like B5, A5 even A4-R, machine after 2-3 minutes on printing, shows me E001-002.
I changed the main thermistor but nothing new.
Temperature on main thermistor shows 192-202 grade celcius (when printing) but in edges of fuser roller, sub-thermistor goes fast to 230 grade celcius and i got the error code.
Checked and inspected but could not find any issue physically.
Any help i'll appreciate.
Thank you

I had a 8295 I had to replace the top half of the fuser twice for E001 codes (don't remember the sub code). Tried thermistors and same problem.

[roho]

Normally if the shutter was a issue you would get a dedicated error, but considering it's smaller sizes I'd consider that as well.