IR7105 with V2 Finisher 1320 jam code

[Mike Barbee]

I am seeing a 1320 jam code related to a jam located at the inlet to the saddle finisher. I have turned on and off. There is no paper blocking the sensor and the sensor appears to be fine. Checked the connection of sensor. It is almost as if it is just hung up. Any ideas?

Thanks

[fm100]

I am seeing a 1320 jam code related to a jam located at the inlet to the saddle finisher. I have turned on and off. There is no paper blocking the sensor and the sensor appears to be fine. Checked the connection of sensor. It is almost as if it is just hung up. Any ideas?

Thanks

It is the guide at location FA2, just below PS3. The guide moves rearwards and may have bent mount at the rear, blocking the light path to PS3.

Solution is to reform the guides - there is a lot of play in their movement, and caused by jam removal bending the guide.

Hope this helps.