Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 250+ Posts PinevskiS's Avatar
    Join Date
    Jul 2009
    Location
    SKOPJE
    Posts
    284
    Rep Power
    0

    Canon IR ADV 4235 i

    Hi,
    I have a problem with paper station unit on Tray 2,
    Problem is lift, dont come in correct positions. When close tray lift go up but after 5-6 millimetar stop .If have slightly paper in tray when make copy feed roller cant move paper,if I put full paper in tray then feed can take a paper and move .I change feed station unit and tray 2 (with new) and the same problem.
    Any solutions.
    Thanks
    B.R.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Oct 2016
    Location
    manila
    Posts
    108
    Rep Power
    0

    Re: Canon IR ADV 4235 i

    Quote Originally Posted by PinevskiS View Post
    Hi,
    I have a problem with paper station unit on Tray 2,
    Problem is lift, dont come in correct positions. When close tray lift go up but after 5-6 millimetar stop .If have slightly paper in tray when make copy feed roller cant move paper,if I put full paper in tray then feed can take a paper and move .I change feed station unit and tray 2 (with new) and the same problem.
    Any solutions.
    Thanks
    B.R.
    did you try to swap the pick-up assy from tray 1 to tray 2? this is first step if you are not sure which part having problem.....if you done it before and same problem check the machine if in a balance position..good luck

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here