Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    ir addv c 5030 developer leakage

    Dears ,

    the weird that i have 5030i its leakage the starter all the colors except the blk , i checked all the developer assemble colors they changed to blk and then leakage , i wonder if some one face same problem, i changed 2 sets of drums and developer assembly and i lost it ,

    changed Main pcb1 / Main Pcb2 / High Voltage PCB / Drum drive PCB and still the same .
    Distinguished road makes you jewel in rough

  2. #2
    Service Manager 10,000+ Posts
    ir addv c 5030 developer leakage

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: ir addv c 5030 developer leakage

    Check developer bias tabs.
    Make sure not pushed in and stuck in the housing not allowing it to make proper contact.

    Note:
    HVT2 is for Black Issues.
    HVT1 is for the other Colors.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: ir addv c 5030 developer leakage

    Quote Originally Posted by teckat View Post
    Check developer bias tabs.
    Make sure not pushed in and stuck in the housing not allowing it to make proper contact.

    Note:
    HVT2 is for Black Issues.
    HVT1 is for the other Colors.

    Thanks i changed the hvt pcb for the all colors and all the colors appeared just the yellow not. I have changed all the pcb"s board with the power supply and realy pcb and still the yellow appearin so so light.any one faced this before the werid that thr machine is just working 50,000 k
    Distinguished road makes you jewel in rough

  4. #4
    Service Manager 5,000+ Posts
    ir addv c 5030 developer leakage

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,530
    Rep Power
    182

    Re: ir addv c 5030 developer leakage

    We are seeing this issue a lot but it only seems to occur when the customer is using compatible toner.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #5
    Service Manager 10,000+ Posts
    ir addv c 5030 developer leakage

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: ir addv c 5030 developer leakage

    Quote Originally Posted by mramlawi View Post
    Thanks i changed the hvt pcb for the all colors and all the colors appeared just the yellow not. I have changed all the pcb"s board with the power supply and realy pcb and still the yellow appearin so so light.any one faced this before the werid that thr machine is just working 50,000 k

    Did I check the bias tab for yellow ??
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  6. #6
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    834
    Rep Power
    34

    Re: ir addv c 5030 developer leakage

    Quote Originally Posted by teckat View Post
    Did I check the bias tab for yellow ??

    Thanks the problem solved by changing the blk hvt pcb beacuse there was a commection spring located on the left side of the machine (spring was stuck inside)
    Attached Images Attached Images
    Distinguished road makes you jewel in rough

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here