Results 1 to 2 of 2
  1. #1
    Independent Service Tech 100+ Posts skibum's Avatar
    Join Date
    Apr 2009
    Location
    NH
    Posts
    164
    Post Thanks / Like
    Rep Power
    0

    Finisher V1 jamming on IR7105

    The jam code is 100E when it jams. The rear belt inside swing guide area is getting wrapped around drive roller mechanism (FB5-9103-000 ribbed belt). Has anyone had to replace the belts because it is causing jams? It is happening every few hundred to maybe 1500 page intervals approximately.

    Please help! Thanks.


  2. #2
    Field Supervisor 500+ Posts tinnyjay's Avatar
    Join Date
    Oct 2009
    Location
    Tirana
    Posts
    589
    Post Thanks / Like
    Rep Power
    0

    Re: Finisher V1 jamming on IR7105

    Quote Originally Posted by skibum View Post
    The jam code is 100E when it jams. The rear belt inside swing guide area is getting wrapped around drive roller mechanism (FB5-9103-000 ribbed belt). Has anyone had to replace the belts because it is causing jams? It is happening every few hundred to maybe 1500 page intervals approximately.

    Please help! Thanks.
    There are two belts like that. Sometimes one gets out of its place(mostly the one in the door's side) and you have to put it again in its place. See the other one where its placed and fix the other. I know how to do, but cant help further.
    Hope you do it!

    "Who loves the roses,must also bear thumbs"

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here