Hot Fixing Drive Motor

[teckat]

To Teckat : When I said it has some heat - I meant cooler than its "hot state" - but still hot.

To Geo: That motor particularly (being close to fixing unit) will get some of the fixing heat, but I am talking "you cannot touch it for more than 5 sec - kinda heat"

I will order another motor and probably the relay board aswell.

Thnx!

---

causes no jams or errors
no smoke conditions

Macgyver.jpgcall MacGyver

[mramlawi]

Hi try to clean the fans also if the machine is set closer to the wall try to relocate it far a little from the wall

[teckat]

Hi try to clean the fans also if the machine is set closer to the wall try to relocate it far a little from the wall

---

point to note:
Fans do not "kool" off 24v dc stepping motors

[spectraindo]

Check the Heat Discharge Fan FM3 and the Filters.

[teckat]

E014 -0001 = Fixing Motor error


Lock error of the Fixing Motor (M3).
Remedy
1. Check the gear of the Fixing Drive Unit. -> Replace the
gear.
2. Replace the Fixing Motor (M3).
3. Check the connection drawer between the Fixing Assembly
and the host machine.
4. Replace the Main Driver PCB (PCB2).

[V-P]

I did order the fixing drive unit as a whole (to be on the safe side).

The error happened only once - after that I did maintenance on the fixing unit - and no error so far.

From what I can tell - it is not airflow issue.

Anyway, I will update when part will come