Firmware for a Canon IR C5240

**Elmtech** · 05-05-2017

Hello,

Is there any chance of someone supplying me with firmware for a Canon IR-C5240 it is to repair an issue with the scanner producing scans/ copies with almostvhalf the page black. It was suggested in another post here to update the firmware.

Thanks

**teckat** · 05-05-2017

Originally Posted by Elmtech

Hello,

Is there any chance of someone supplying me with firmware for a Canon IR-C5240 it is to repair an issue with the scanner producing scans/ copies with almostvhalf the page black. It was suggested in another post here to update the firmware.

Thanks

Device has an Internet Connection.

The copier can download and install System Software automatically by following these steps:
1) Service Mode Level 1
2) Select Copier
3) Select Option
4) Select FNC-SW
5) Enter 1 for each of the following: CDS-FIRMCDS-UGWCDS-LVUP
6) Press Ok
7) Reboot the Copier.
8) Your Screen should now have a Schedule Update section.

================================================== ================================================== =====

3 methods for using the CDS to update Firmware

Method 1:

The technician is onsite, enters service mode on the copier, selects the updater and has the machine attach to the CDS where the firmware is brought to the machine and the technician may select a version to apply and manually install the firmware.

Method 2 :

The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect to the CDS to obtain Firmware. The Firmware will reside on the device until such time as a service technician visits the device and manually applies the Firmware.

Method 3:

The Dealer uses imageWARE Remote to connect to the device and schedule a time where the device will connect with CDS, obtain the firmware and apply it automatically without any intervention of a technician.