Canon clc3200 red color is orange

[Salonpixel]

SkyNet, thanks, but replacing the drum unit has solved this problem. Now I have a bad color transfer.
It is very difficult for me to write in English, so I will show scans of prints tomorrow.
Thank you for your patience and help!

[skynet]

SkyNet, thanks, but replacing the drum unit has solved this problem. Now I have a bad color transfer.
It is very difficult for me to write in English, so I will show scans of prints tomorrow.
Thank you for your patience and help!

Great we are here to help.

[teckat]

Yes, this is printer only : о
Today I tried all day to adjust the color rendition, but not much happened.
Tomorrow I'll try to show all the tests from the printer (test 10, test 5) and show problem with color rendition.
I will say briefly - the print turns out to be too dark and inaccurate in terms of color rendering.
I have not service Canon in my sity, and i need help.
Dear teckat, thank you for your help! Bigest respect you!

---

* Note - On copiers that are printer-only models (no platen glass), the CC-100 utility will be needed to perform the auto gradation adjustment.

Canon CanoScan 3000F or 3200F scanner 9 or added Canon CanoScan LiDE35 ) is required to use the CC-100 utility.

see link for CC-100 Utility

https://www.dropbox.com/s/53ub3gr4n8...v2.85.exe?dl=0

If you do not have the CanoScan 3000F ot 3200F ( very old scanner ) available, there is an alternate method that can be utilized.

This method will cause the copier to lose many of your settings (and stored jobs). You can do a HD Clear by following the steps below:
1. Go into Service Mode, by pressing Additional Function, 2 and 8 simultaneously, and then Additional Function again.
2. Select COPIER.
3. Select FUNCTION.
3. Select SYSTEM.
4. Select CHK-TYPE=[1].
5. Select HD-CLEAR.
The following information will return to factory defaults as a result:

• User mode settings
• Job log
• PDL fonts
• PDL form data
• ICC profile
• Macro data
• mailboxes
• ================================================== ====================
• Is there an alternate calibration method (other than the CC-100 utility) for printer only units if you have an imagePass C1 attached?
  
  Answer :
  Yes, you can use VisualCal available in the imagePass C1's calibration utility menu.
• Follow the steps below to access and perform VisualCal:1. Access the Printer window in the copier display.
  2. Select Functions in the imagePass C1 window.
  3. Select the Calibration menu.
  4. In the calibration menu select Set Up Calibration / Expert / VisualCal, then in the VisualCal set up select either Auto Select or Manual Feed as paper source.
  Now you can begin the calibration process.
  In the Printer / Functions screen select Calibration, then choose either Default, Custom A, or Custom B. Then in the Gradation Smoothing screen select Off, Fine, or Course. In the Print Limits Page screen select Yes.
  The VisualCal limits page will print. Follow the steps on the Print Limits VisualCal page to perform and complete calibration.
  
  

[Salonpixel]

O, teckat! Thank you very mach! I'll start with resseting hdd.
Tell me, can there be a reason for poor printing of low humidity?
My humidity is 25%. Its very low?

[teckat]

O, teckat! Thank you very mach! I'll start with resseting hdd.
Tell me, can there be a reason for poor printing of low humidity?
My humidity is 25%. Its very low?

===============================================

before messing with HDD

try the VisualCal

1. Check to make sure that the toner save mode is OFF on the image-pass C1
2. In your case--run some internal test prints in service mode
3. You may want to delete then reload the print drivers
4. if your test pages are all fine from the image pass and internal test pages./
try looking at the print drivers and default settings within the print driver.

if internal test prints are light-----make sure your ITB UNIT is locked up in position (

look at manual-------------for instructions on how to print internal test prints
------------------https://www.scribd.com/doc/61327440/Canon-Irc3200-Service-Manual

[Salonpixel]

Okay, thatks! After then I'll show you scan.

[Salonpixel]

Распечатать тест 10. Cyan барабан закончен?

IMG_0016_1.jpg

roller.jpg

[teckat]

Распечатать тест 10. Cyan барабан закончен?

IMG_0016_1.jpg

roller.jpg

---------------------------------------------------------------------------------------------------------------------

inspect ITB unit transfer belt surface

do marks move when u power off & on printer

[Salonpixel]

Tnks!
I will inspect ITB.
Say me please, cyan in the test 10 very bad? The developer is died? ) Or charge roller is bad?
I also looked at the humidity - it was 15%.
Can the relative humidity influence the loss of color?

[teckat]

Tnks!
I will inspect ITB.
Say me please, cyan in the test 10 very bad? The developer is died? ) Or charge roller is bad?
I also looked at the humidity - it was 15%.
Can the relative humidity influence the loss of color?

Cyan drum could be old. The four primary charge rollers are in the ITB UNIT,

Humid conditions effect paper, & toner.