Canon ir 1022 "Out of toner , change toner'

[Orion2010]

hello to all, i have problem with canon ir 1022, show out of toner change toner, i replace the toner but is appear again.I replace developer cassette, after 5 days work the problem appear again!!! any idea ?


thanks

[guitar9199]

Have you cleaned the white connector? I know this can cause that. There is a spring which sets on a plastic piece in front of the developer assembly, and connects the white wire to the contact on the developer assembly. Make sure the spring did not fall off.


1023 Hopper.jpg

[LeadSlurpee]

Hi, an iR1024A is giving me similar issues. I gave the white cable a look over and disconnect and a reconnect on both ends, but when I look at the sensor test menu for the toner antenna the voltage difference is still the same regardless of whether the cartridge slot is empty or contains a full cartridge. Well nearly full, the copier has managed to spill some toner out of it while looping trough the initialisation, possibly because it thinks it's empty.

Could a large ammount of toner spilled around the deveoper assembly cause the antenna to give faulty readings?