Please help...Machine recently moved to another location. Trying to start up but keep getting the error code 000998-0002-05 on initial start up. Can some please tell me what this error is pointing to and how I would go about correcting the problem.
Please help...Machine recently moved to another location. Trying to start up but keep getting the error code 000998-0002-05 on initial start up. Can some please tell me what this error is pointing to and how I would go about correcting the problem.
E998 codes after a machine being moved points to loose connectors. Unplug and reseat your connectors on DCON and the Driver PCB's. That should take care of it.
I am a new to this machine - I checked the connections on the back of the main controller, where else should I look? If you could describe the area as I have a learning curve to get over.
Problem :
E998 error codes displayed after a new install is performed on the imagePRESS C7000VP Series.
Solution :
It has been noted that certain connectors are loose and not plugged in all the way. Below is an example of connectors that have been most vulnerable.
27220.jpg
Accidents don't just happen. They must be carelessly planned.
This is error related to registration feed driver PCB.
Capture.jpg
Last edited by zoraldinho; 07-13-2017 at 12:28 PM.
Practice makes perfect
If it ain't broke, don't fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
Bookmarks