Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Feb 2013
    Posts
    164
    Rep Power
    11

    C700 imagePRESS Fixing question

    Hi all,

    Just replaced upper & lower units on one of these and reset counters.

    It's still saying 'fixing unit needs to be replaced'.

    Any ideas?

    Any other counters that need resetting at certain points?

    Cheers


  2. #2
    Service Manager 1,000+ Posts
    C700 imagePRESS Fixing question

    charm5496's Avatar
    Join Date
    Apr 2008
    Posts
    2,353
    Rep Power
    48

    Re: C700 imagePRESS Fixing question

    sounds like you a have an issue with the drive system on the fixing drive. There have been issues the lack of grease on the main drive gear, so you may want to check the condition of yours.

    Accidents don't just happen. They must be carelessly planned.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jan 2014
    Posts
    108
    Rep Power
    10

    Re: C700 imagePRESS Fixing question

    (Lv.1)
    COPIER >
    OPTION >
    DSPLY-SW
    OPEMANT>
    ON/OFF of operator maintenance modeTo set ON/OFF of operator maintenance mode.
    When 0 is set, operator maintenance mode is not displayed.
    When 1 or 2 is set, "Operator Maintenance Mode" is displayed in
    Settings/Registration menu.
    When 1 is set, sub parts counter can be managed individually at
    replacement of the Fixing Assembly.
    When 2 is set, sub parts counters are cleared collectively at
    replacement of the Fixing Assembly.
    1) Enter the setting value, and then press OK key.
    2) Turn OFF/ON the main power switch.

    (Lv.2)
    COPIER >
    OPTION >
    DSPLY-SW
    OP-ALMT>
    Set warning mssg timing in operator mntc:
    To set the timing to display warning message of parts replacement/
    cleaning counter in operator maintenance mode.
    With this setting, warning message is displayed once before reaching
    the specified life of parts or number of sheets for cleaning.
    1) Enter the setting value, and then press OK key.
    2) Turn OFF/ON the main power switch.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jan 2014
    Posts
    108
    Rep Power
    10

    Re: C700 imagePRESS Fixing question

    service mode
    level 2
    copier
    dsply-sw
    fxmsg-sw set to 0


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here