Results 1 to 8 of 8

Thread: canon ir 2525

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2010
    Location
    malaysia melaka
    Posts
    73
    Rep Power
    0

    canon ir 2525

    error code E000520 need help , appreaciate .


  2. #2
    Service Manager 10,000+ Posts
    canon ir 2525

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,151
    Rep Power
    213

    Re: canon ir 2525

    Quote Originally Posted by Tamyiapsoon View Post
    error code E000520 need help , appreaciate .

    How to clear E000

    Enter service mode by pressing additional functions than 2 than 8 and then Additional Functions.
    #SSSW will be displayed.
    Use the right arrow and scroll to #CLEAR then press OK.
    Use the right arrow and scroll to ENGINE then press OK.

    ERRCLR will be displayed then press OK.
    Then power cycle the machine.


    are u sure about that e000520 ????

    never seen than -520
    Detail Code on this model

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Trusted Tech 50+ Posts ARUN MISHRA's Avatar
    Join Date
    Nov 2010
    Location
    INDIA
    Posts
    64
    Rep Power
    15

    Re: canon ir 2525

    I think this is shorter, finisher, unit problem.
    If machine have a finisher unit , than try you disconnected from machine and try a check.

    ARUN KUMAR MISHRA

  4. #4
    Technician
    Join Date
    Mar 2017
    Posts
    21
    Rep Power
    0

    Re: canon ir 2525

    Quote Originally Posted by teckat View Post

    How to clear E000

    Enter service mode by pressing additional functions than 2 than 8 and then Additional Functions.
    #SSSW will be displayed.
    Use the right arrow and scroll to #CLEAR then press OK.
    Use the right arrow and scroll to ENGINE then press OK.

    ERRCLR will be displayed then press OK.
    Then power cycle the machine.


    are u sure about that e000520 ????

    never seen than -520
    Detail Code on this model
    Hi, Teckat.
    Canon Ir 2520 - on sreen show now : Network download available ip address. Machine does not use , all keys do not use too. It may be hung , what's machine and action. I don't understand this machine, please help me . Thank you very much.


  5. #5
    teacher-guide-expert-guru 2,500+ Posts
    canon ir 2525

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,076
    Rep Power
    75

    Re: canon ir 2525

    Upgrade firmware.Call Canon.

    Practice makes perfect
    If it ain't broke, don't fix it
    There's no such thing as a free lunch
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  6. #6
    Service Manager 10,000+ Posts
    canon ir 2525

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,151
    Rep Power
    213

    Re: canon ir 2525

    Check the DIMM Assembly on the Main Controller ---remove and re-seat it.
    May also be bad------------------------
    DIMM.jpg


    Copier display is locked up with a message of '
    Network Download Available' at power on.'

    The message occurred after the Main Controller was replaced.


    After comparing the original Main Controller and the replacement Main Controller, it was noticed that the position of the dip switches on the dip switch bank were in different positions.
    Setting the dip switches on the replacement Main Controller to the following resolved the network download available message at power on.

    Set dip switches 1, 2 and 3 on and bit 4 "off"

    kbase123204-2.jpg

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Technician
    Join Date
    Mar 2017
    Posts
    21
    Rep Power
    0

    Re: canon ir 2525

    Quote Originally Posted by teckat View Post
    Check the DIMM Assembly on the Main Controller ---remove and re-seat it.
    May also be bad------------------------
    DIMM.jpg


    Copier display is locked up with a message of '
    Network Download Available' at power on.'

    The message occurred after the Main Controller was replaced.


    After comparing the original Main Controller and the replacement Main Controller, it was noticed that the position of the dip switches on the dip switch bank were in different positions.
    Setting the dip switches on the replacement Main Controller to the following resolved the network download available message at power on.

    Set dip switches 1, 2 and 3 on and bit 4 "off"

    kbase123204-2.jpg
    Thank you very much. Have a good day.


  8. #8
    Steve@Kings 50+ Posts Kings's Avatar
    Join Date
    Nov 2009
    Location
    London
    Posts
    67
    Rep Power
    17

    Re: canon ir 2525

    This is what the manual says.
    Hope it helps

    E520 0001
    Title Shift Motor (M4) error

    Description The shift roller does not leave the shift roller home position

    when the Shift Motor (M4) has been driven for 1.2 seconds.

    Remedy 1.Replace the Shift Roller HP Sensor (S2).

    2.Replace the Shift Motor (M4).

    3.Replace the Finisher Controller PCB (PCB1)



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here