Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: ADF problem

  1. #1
    wizyy2k
    Guest

    Post ADF problem

    Can someone please help me with this problem. I have advance c5051 and anytime i scan from the ADF it recognize the document as A5 but when i put it on the top glass it comes out ok. I tried changing the whole optical with another ADF it still gives the same problem. I need your help on the platform

  2. #2
    Field Supervisor 500+ Posts mramlawi's Avatar
    Join Date
    Jul 2011
    Posts
    835
    Rep Power
    34

    Re: ADF problem

    Quote Originally Posted by wizyy2k View Post
    Can someone please help me with this problem. I have advance c5051 and anytime i scan from the ADF it recognize the document as A5 but when i put it on the top glass it comes out ok. I tried changing the whole optical with another ADF it still gives the same problem. I need your help on the platform

    Must make adjt for the feeder in service mode
    Distinguished road makes you jewel in rough

  3. #3
    Service Manager 10,000+ Posts
    ADF problem

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,106
    Rep Power
    244

    Re: ADF problem

    Quote Originally Posted by wizyy2k View Post
    Can someone please help me with this problem. I have advance c5051 and anytime i scan from the ADF it recognize the document as A5 but when i put it on the top glass it comes out ok. I tried changing the whole optical with another ADF it still gives the same problem. I need your help on the platform


    what size is original document

    Adjust the ADF tray Width

    1. Service mode > FEEDER > FUNCTION > TRY-A4(TRY-LTR) > Set the Tray Guide with A4 size(LTR size) > Press OK key.
    2. TRY-A5R(TRY-LTRR) > Set the Tray Guide with A5R(STMT/LTRR/LGL) > Press OK key.

    Set Service Mode > COPIER > OPTION > FNC-SW > MODEL-SZ

    MODEL-SZ= Fixed magnificaton & DADF original detect size.
    Service Mode Lv.1= To set the fixed magnification ratio display and the original detection size with DADF. ■
    It is set automatically at the time of installation of the Reader according to the location.
    Use case Upon user’s request

    Adj/set/operate method
    1) Enter the setting value, and then press OK key.
    2) Turn OFF/ON the main power switch.

    Display/adj/set range= 0 to 3

    0: AB configuration (6R5E) for Japan,
    1: Inch configuration (5R4E) for North/Middle/South America,
    2: A configuration (3R3E) for Europe,
    3: AB/Inch configuration (6R5E) for Asia, Oceania, South America

    Default value The value differs according to the location.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  4. #4
    Trusted Tech 50+ Posts ARUN MISHRA's Avatar
    Join Date
    Nov 2010
    Location
    INDIA
    Posts
    77
    Rep Power
    28

    Re: ADF problem

    Teckat sir saying you whole story.
    Nothing is outside .
    ARUN KUMAR MISHRA

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here