Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member
    Join Date
    Jul 2017
    Location
    Palembang
    Posts
    5
    Rep Power
    0

    E000110-0001 Canon iR3045

    This morning, I meet a problem my copier machine iR3045 with error code E000110-0001.
    Please help me what i should do?
    Ty


  2. #2
    Technician Cabo's Avatar
    Join Date
    Aug 2012
    Location
    Podgorica
    Posts
    41
    Rep Power
    11

    Re: E000110-0001 Canon iR3045

    Check Laser unit and DC Controller.Check Fuse on the DC Controller


  3. #3
    Junior Member
    Join Date
    Jul 2017
    Location
    Palembang
    Posts
    5
    Rep Power
    0

    Re: E000110-0001 Canon iR3045

    Quote Originally Posted by Cabo View Post
    Check Laser unit and DC Controller.Check Fuse on the DC Controller


    Thank you for reply,

    I have checked the Fuses on DC Controller with result:

    Fuse 1 = 0,05 (buzzer)
    20170726_172634Fuse1ps.jpg

    Fuse 2 = 0,03 (buzzer)
    20170726_172554Fuse2ps.jpg

    Fuse 3 = 1,666 ( no buzzer)
    20170726_172700Fuse3ps.jpg


    What is the third conclusion of that measurement result?

    Attached Images Attached Images

  4. #4
    Service Manager 10,000+ Posts
    E000110-0001 Canon iR3045

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213

    Re: E000110-0001 Canon iR3045

    Remember that u can't check a fuse that is in series on a board.

    If in series, u can get a false read as good or bad, especially if another component is good or bad.

    How to test a fuse in a circuit.
    Testing the Fuse😱


    Turn the device off first and Remove power.
    Remove the fuse from the vehicle or device.
    Make sure it is turned off before the fuse is removed.😱
    Turn the meter on and set it.
    You can rotate the selector to Ω, or OHMS. ...
    Put one lead on each end of the fuse and look at the display. ...
    Test the fuse.

    By using an Ohmeter to check continuity of componets still in a circuit, you may also be checking other (non-fuse)componets in the circuit as well, thus giving misleaading indications.
    Using a low Ohms setting on the meter might help eliminate (somewhat) this problem.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Junior Member
    Join Date
    Jul 2017
    Location
    Palembang
    Posts
    5
    Rep Power
    0

    Re: E000110-0001 Canon iR3045

    Quote Originally Posted by teckat View Post
    Remember that u can't check a fuse that is in series on a board.

    If in series, u can get a false read as good or bad, especially if another component is good or bad.

    How to test a fuse in a circuit.
    Testing the Fuse😱


    Turn the device off first and Remove power.
    Remove the fuse from the vehicle or device.
    Make sure it is turned off before the fuse is removed.😱
    Turn the meter on and set it.
    You can rotate the selector to Ω, or OHMS. ...
    Put one lead on each end of the fuse and look at the display. ...
    Test the fuse.

    By using an Ohmeter to check continuity of componets still in a circuit, you may also be checking other (non-fuse)componets in the circuit as well, thus giving misleaading indications.
    Using a low Ohms setting on the meter might help eliminate (somewhat) this problem.
    I have remove the fuse from dc controller PCB. And have tested with result : Both of three fuse in good measurement. 1 fuse was failed.
    Now I confused how much ampere or how wattage these fused.
    I dont have schmematic diagram for this DC Controller.
    Please help me.
    I


  6. #6
    Service Manager 10,000+ Posts
    E000110-0001 Canon iR3045

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213

    Re: E000110-0001 Canon iR3045

    Did u note where u removed it from on pcb ?

    Post a pic of fuse.

    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Technician Cabo's Avatar
    Join Date
    Aug 2012
    Location
    Podgorica
    Posts
    41
    Rep Power
    11

    Re: E000110-0001 Canon iR3045

    Quote Originally Posted by teckat View Post
    Did u note where u removed it from on pcb ?

    Post a pic of fuse.
    I think the value F3 is 0,5A (I'm not sure)


  8. #8
    Junior Member
    Join Date
    Jul 2017
    Location
    Palembang
    Posts
    5
    Rep Power
    0

    Red face Re: E000110-0001 Canon iR3045

    Quote Originally Posted by teckat View Post
    Did u note where u removed it from on pcb ?

    Post a pic of fuse.
    This's pict my fuses

    20170809_115448.jpg

    20170809_115508.jpg

    Thank you for reply


  9. #9
    Service Manager 1,000+ Posts
    E000110-0001 Canon iR3045

    Brian8506's Avatar
    Join Date
    Feb 2009
    Location
    New Jersey
    Posts
    1,081
    Rep Power
    37

    Re: E000110-0001 Canon iR3045

    When the side door is closed, the laser shutter is opened via a cable that goes from the interlock area around to the laser where it opens it from underneath. I have seen this cable broken. Or you may simply have a bad laser unit.Found this also
    Error :

    Error code E100/110

    Workaround :

    After replacing the laser, laser motor, main controller, dc controller, and checking the wiring the problem was resolved by replacing the registration sensor.



    Problem :

    Error and jam codes are very intermittent. J0201 happens with no paper in path, history showed E100-0001 & E110-0000. Replaced Laser Assembly and PS10 then tried a DCON clear with no change in codes.

    Solution :

    Replacing DC Controller { FM3-1262-000 for 3025 & 3030 }{ FM3-1263-000 for 3035 & 3045 } resolved issue



    Error :

    E100, E110 Error Codes

    Workaround :

    Although the Main Power Supply, Controller Power Supply, DC Controller, Laser, and Drum, were replaced for this issue, the Accessories Power Supply Pcb. resolved the problem (Part number FK2-0338-000).


  10. #10
    Service Manager 10,000+ Posts
    E000110-0001 Canon iR3045

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,153
    Rep Power
    213

    Re: E000110-0001 Canon iR3045

    Quote Originally Posted by emi kusrini View Post
    This's pict my fuses

    20170809_115448.jpg

    20170809_115508.jpg

    Thank you for reply



    believe that is a PICO Fuse _ Littefuse _ Fast Acting

    it has radial leads === angled down

    epoxy solid color coated ? usually 125v - L F 5 is most likely Amp rating ?


    bring to electronic shop

    Last edited by teckat; 08-09-2017 at 03:25 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here