Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Jul 2017
    Location
    accra
    Posts
    8
    Rep Power
    0

    Angry canon ir 6075 Advance

    pls can anyone help me with this Error code. when I on the machine this Error shows Eooo350-0001 pls can anyone help


  2. #2
    Technician
    Join Date
    Nov 2015
    Posts
    23
    Rep Power
    5

    Re: canon ir 6075 Advance

    Quote Originally Posted by charles View Post
    pls can anyone help me with this Error code. when I on the machine this Error shows Eooo350-0001 pls can anyone help
    Try First Controller System Error Diagnosis 4-1) Turn ON the Main Power Supply Switch while pressing the numeric keys '2' and '4' simultaneously.

    4-2) Keep pressing the numeric keys (for approx. 20 seconds) until the following screen appears on the Control Panel.


    4-3) Diagnosis is completed in approx. 3 minutes and the result is displayed on the Control Panel.
    4-4) When the diagnosis result is normal

    OK.jpg


    4-5) When an error is detected by diagnosis
    Detailed information is displayed under the judgment result. In detailed information, the name of the test where an error was detected is indicated.
    NG.jpg

    The following screen is an enlarged view of the detailed information indicated above. Explanation of the detailed error information is described.


  3. #3
    Junior Member
    Join Date
    Jul 2017
    Location
    accra
    Posts
    8
    Rep Power
    0

    Re: canon ir 6075 Advance

    Quote Originally Posted by apoxi View Post
    Try First Controller System Error Diagnosis 4-1) Turn ON the Main Power Supply Switch while pressing the numeric keys '2' and '4' simultaneously.

    4-2) Keep pressing the numeric keys (for approx. 20 seconds) until the following screen appears on the Control Panel.


    4-3) Diagnosis is completed in approx. 3 minutes and the result is displayed on the Control Panel.
    4-4) When the diagnosis result is normal

    OK.jpg


    4-5) When an error is detected by diagnosis
    Detailed information is displayed under the judgment result. In detailed information, the name of the test where an error was detected is indicated.
    NG.jpg

    The following screen is an enlarged view of the detailed information indicated above. Explanation of the detailed error information is described.
    This the result boss


  4. #4
    Junior Member
    Join Date
    Jul 2017
    Location
    accra
    Posts
    8
    Rep Power
    0

    Re: canon ir 6075 Advance

    [QUOTE=charles;571066]This the result boss
    (NG) : SN- 5 SM BUS SOC DIMM 1
    (NO) : SN- 9 PCI CONFIGURATION PCI-BRIDGE
    (NO) : SN- 16 JUST ROM READ
    (NG) : SN- 17 FRAM
    (NG) : SN- 19 GS


  5. #5
    Technician
    Join Date
    Nov 2015
    Posts
    23
    Rep Power
    5

    Re: canon ir 6075 Advance

    [QUOTE=charles;571068]
    Quote Originally Posted by charles View Post
    This the result boss
    (NG) : SN- 5 SM BUS SOC DIMM 1
    (NO) : SN- 9 PCI CONFIGURATION PCI-BRIDGE
    (NO) : SN- 16 JUST ROM READ
    (NG) : SN- 17 FRAM
    (NG) : SN- 19 GS



    • "no" means that optional PCBs are not mounted. When [no] is displayed although an optional PCB is mounted, it means that an error has been occurring.
    • "NG" means that an error occurred to PCBs mounted as standard.



    SN-5 SM BUS SOC DIMM1 Check an SM bus error in the Main Controller PCB 1 and SDRAM (M1) on the Main Controller PCB 2 Main Controller PCB 1
    PCI Expansion PCB
    Main Controller PCB 2
    SDRAM (M1) on Main Controller PCB 2
    1. Check the connection of the Main Controller PCB 1, and the Main Controller PCB 2.
    2. Check the installation of SDRAM (M1) on the Main Controller PCB 2.
    3. Replace SDRAM (M1) on the Main Controller PCB 2.
    4. Replace the Main Controller PCB 2.
    5. Replace the Main Controller PCB 1.


    SN-9
    PCI Config
    PCI-Bridge
    Check a PCI bus error between the Main Controller PCB 1 and the PCI Expansion PCB Main Controller PCB 1
    PCI Expansion PCB
    1. Check the installation between the Main Controller PCB 1 and PCI Expansion PCB.
    2. Replace PCI Expansion PCB.
    3. Replace the Main Controller PCB 1.
    Supplementary Information: If the PCI Expansion PCB is not installed, [no] is displayed for the diagnosis result.

    SN-16 JUST ROMREAD Check On-board ROM on the Main Controller PCB 2 Main Controller PCB 2 It is always no indication.
    A result does not become NG

    SN-17 FRAM Check Main Controller PCB 2 and the connection of the memory PCB Main Controller PCB 2
    Memory PCB
    1. Check the installation of Memory PCB on the Main Controller PCB 2.
    2. Replace Memory PCB on the Main Controller PCB 2.
    3. Replace the Main Controller PCB 2.

    SN-19 GS Check On-board BUS on the Main Controller PCB 2 Main Controller PCB 2 1. Replace the Main Controller PCB 2.

    But, first check and clean all mamory on Main 1 and 2. Then Check all connectors.


  6. #6
    Junior Member
    Join Date
    Jul 2017
    Location
    accra
    Posts
    8
    Rep Power
    0

    Re: canon ir 6075 Advance

    [QUOTE=apoxi;571129]
    Quote Originally Posted by charles View Post




    • "no" means that optional PCBs are not mounted. When [no] is displayed although an optional PCB is mounted, it means that an error has been occurring.
    • "NG" means that an error occurred to PCBs mounted as standard.



    SN-5 SM BUS SOC DIMM1 Check an SM bus error in the Main Controller PCB 1 and SDRAM (M1) on the Main Controller PCB 2 Main Controller PCB 1
    PCI Expansion PCB
    Main Controller PCB 2
    SDRAM (M1) on Main Controller PCB 2
    1. Check the connection of the Main Controller PCB 1, and the Main Controller PCB 2.
    2. Check the installation of SDRAM (M1) on the Main Controller PCB 2.
    3. Replace SDRAM (M1) on the Main Controller PCB 2.
    4. Replace the Main Controller PCB 2.
    5. Replace the Main Controller PCB 1.


    SN-9
    PCI Config
    PCI-Bridge
    Check a PCI bus error between the Main Controller PCB 1 and the PCI Expansion PCB Main Controller PCB 1
    PCI Expansion PCB
    1. Check the installation between the Main Controller PCB 1 and PCI Expansion PCB.
    2. Replace PCI Expansion PCB.
    3. Replace the Main Controller PCB 1.
    Supplementary Information: If the PCI Expansion PCB is not installed, [no] is displayed for the diagnosis result.

    SN-16 JUST ROMREAD Check On-board ROM on the Main Controller PCB 2 Main Controller PCB 2 It is always no indication.
    A result does not become NG

    SN-17 FRAM Check Main Controller PCB 2 and the connection of the memory PCB Main Controller PCB 2
    Memory PCB
    1. Check the installation of Memory PCB on the Main Controller PCB 2.
    2. Replace Memory PCB on the Main Controller PCB 2.
    3. Replace the Main Controller PCB 2.

    SN-19 GS Check On-board BUS on the Main Controller PCB 2 Main Controller PCB 2 1. Replace the Main Controller PCB 2.

    But, first check and clean all mamory on Main 1 and 2. Then Check all connectors.

    Thx boss


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here