e110-001 ir 3045 canon

[akm]

Dear/copytechnet team,

I faced problem with mc canon ir 3045 that errors appear e 100-001&e110-001&e110-002
The errors appear after the mc comes to ready and codes pop up after running copies
I checked the ground plate for registration roller .i changed lazer unit and dc from running another mc .I removed the shutter of lazer unit but code still appear
Your reply very important
Thanks
Akm

[teckat]

If the Developer Unit Connector is removed with the Main Power Switch on it may blow the DC Controller resulting in an E110 code

Solution :

Always turn off the Main Power Switch when removing any electrical connectors.


Also
Replace PS13, the Fixing Outlet Sensor
Check Connections Between Main Controller PCB and the Laser Scanner Unit,

Also make sure you have proper Ground from outlet.
Netural to Ground = 0v +/- 0.5v.